Trent Tube Company Profile

16:58 EDT 29th August 2015 | BioPortfolio

Trent Tube was established in 1941 in East Troy, WI by Frank Elge, a Swedish inventor. The company produced tubes for the Wisconsin dairy industry and drawn tubing for Parker Pen. When the U.S. went to war, the War Department asked Frank to expand his manufacturing capabilities to include welded tubing. Almost immediately, Trent Tube was making tubing for chemical plants, aircraft manifolds, refineries, munitions plants, and the Manhattan Project. After the war, Trent Tube continued to grow. In 1948, The Crucible Steel Company acquired Trent Tube and infused capital to allow for even more growth. In 1961, the Carrollton, Georgia plant was built to respond to the demand for large diameter pipe and tubing. The East Troy facility was also expanded. In 1968, Colt Industries acquired The Crucible Steel Company.
The 1970s was a period of extraordinary growth. Trent Tube built two new manufacturing plants, Trentweld and CWA (cold worked annealed), in East Troy. The company added new alloys, expanded its size range, and increased its drawing capabilities.

Location

2015 Energy Drive
East Troy
Wisconsin
53120
United States of America

Contact

Phone: (262) 642-7321
Fax: (262) 642-9571
Email: ttaccounting@crucible.com


News Articles [113 Associated News Articles listed on BioPortfolio]

AventaMed device for tympanostomy tube placement

The AventaMed device has been developed by AventaMed Ltd to perform tympanostomy tube surgery in children and adults with otitis media with effusion, Eustachian tube dysfunction and barotrauma. A tymp...

Surftech Announces Board of Directors

Carlsbad, CA (PRWEB) May 11, 2015 Surftech today publically announced that Bob Rief, Trent Pedersen and David Uri were appointed to the Company’s Board of Directors during the first quarter of...

Low-Tube-Voltage CTC Reduces Dose

Using low-tube voltage CTC provides adequate image quality at lower radiation doses.

InventHelp Inventor Designs Nasogastric (NG) Tube Accessory (DVR-824)

Founded in 1984, InventHelp is attempting to submit the Tube Safe to applicable companies in the hopes of a good faith review. PITTSBURGH, PA (PRWEB) April 22, 2015 “I work as a registered nurse an...

Effect of smoking, alcohol on feeding tube duration in head/neck cancer patients

Current smoking and heavy alcohol consumption appear to be risk factors for prolonged use of a gastrostomy tube (GT, feeding tube) in patients with head and neck cancer undergoing radiotherapy or chem...

FDA labels Teleflex's endobronchial tube recall as Class I

A recall involving 62,882 units of Teleflex Medical's Hudson RCI Sher-I-Bronch, an endobronchial tube, has been categorized b -More- 

After first lab-grown burger, test-tube chicken is next on menu

* Researchers start study to create chicken cells in test tube

Discussing Gastronomy Tube Complexities May Help Families

Discussing the far-reaching implications of gastronomy tube placement on children's health and happiness, and discussing family values and expectations, may ease the difficult decision. Medscape Med...

PubMed Articles [478 Associated PubMed Articles listed on BioPortfolio]

Computational fluid dynamic modelling of the effect of ventilation mode and tracheal tube position on air flow in the large airways.

We have used computational fluid dynamic modelling to study the effects of tracheal tube size and position on regional gas flow in the large airways. Using a three-dimensional mathematical model, we s...

Accuracy of targeted wire guided tube thoracostomy in comparison to classical surgical chest tube placement - A clinical study.

Chest tube malfunction, after the tube thoracostomy, is often the result of an inappropriate chest tube tip position. The aim of this study was to analyse the precision of chest tube placement using t...

Comparison of VivaSight double-lumen tube with a conventional double-lumen tube in adult patients undergoing video-assisted thoracoscopic surgery.

The efficiency of a double-lumen tube depends on its position in the airways, which can be verified by fibreoptic bronchoscopy. The VivaSight DL is a single-use double-lumen tube with a camera embedde...

Early Experience with the StopLoss Jones Tube.

Extrusion is the most common reason for failure after Jones tube placement. The StopLoss Jones tube (SLJT) is a new innovation in Jones tubes that incorporates a flexible silicone internal flange to r...

Does chest tube location matter? An analysis of chest tube position and the need for secondary interventions.

Tube thoracostomy is a common procedure used in the management of thoracic trauma. Traditional teaching suggests that chest tubes should be directed in specific locations to improve function. Common e...

Clinical Trials [627 Associated Clinical Trials listed on BioPortfolio]

Study of Genes and Environment in Patients With Cancer in East Anglia, Trent, or West Midlands Regions of the United Kingdom

RATIONALE: Studying samples of blood from patients with cancer in the laboratory may help doctors learn more about changes that occur in DNA and identify biomarkers related to cancer. ...

Studying Patterns, Causes, and Control of Disease in Patients With Lung Cancer in the North Trent (England) Region

RATIONALE: Gathering information about genetic and environmental factors from patients with lung cancer and their partners and first-degree relatives may help doctors learn more about the ...

Leak Pressure of Uncuffed Pediatric Endotracheal Tubes

Children and adults frequently need a 'breathing tube' when having anesthesia for surgery. The breathing tube is usually inserted after the anesthesia doctor puts a patient to sleep with m...

Laryngeal Morbidity After Endotracheal Intubation - Endoflex-tube Versus Use of Stylet

This study is aimed at reducing the risk of hoarseness and damage to the vocal cords following general anaesthesia. Conventional endotracheal intubation with use of a stylet will be compar...

The Impact of Nasogastric Indwelling Versus Oral Intermittent Tube Feeding Methods on Premature Infants

This clinical pilot trial is being conducted to learn more about the infant's feeding behavior while being fed by indwelling nasogastric tube placement or by intermittent oral tube placeme...

Companies [60 Associated Companies listed on BioPortfolio]

Trent Tube

Trent Tube was established in 1941 in East Troy, WI by Frank Elge, a Swedish inventor. The company produced tubes for the Wisconsin dairy industry and drawn tubing for Parker Pen. When the U.S. went t...

K-Tube Technologies

Founded in 1974, K-Tube developed a laser weld technology for bringing a lower cost needle to the medical device market. Today, K-Tube is the largest U.S. based manufacturer of sm...

New England Small Tube

New England Small Tube is the world leader in small diameter, stainless steel tube fabrication. We produce high quality tubular parts and assemblies for Original Equipment Manufacturers.Original Equip...

Syncro Medical Innovations, Inc

Syncro Medical Innovations, Inc., located in Macon, GA, was founded in 1998 by Dr. Sabry Gabriel to develop The Gabriel™ Feeding Tube, a magnetically guided enteral feeding tube. Several U.S. and in...

James Trent, Queens Village Republican Club

Annual Lincoln Dinner

More Information about "Trent Tube" on BioPortfolio

We have published hundreds of Trent Tube news stories on BioPortfolio along with dozens of Trent Tube Clinical Trials and PubMed Articles about Trent Tube for you to read. In addition to the medical data, news and clinical trials, BioPortfolio also has a large collection of Trent Tube Companies in our database. You can also find out about relevant Trent Tube Drugs and Medications on this site too.


Advertisement
 
Advertisement
 

Corporate Database Quicklinks



Searches Linking to this Company Record