| OXYGEN
OXYGEN COMPRESSED USP UN 1072 OXYGEN 2 FILLED AND SERVICED BY SOUTH JERSEYWELDING SUPPLY VINELAND, NJ
PRODUCED BY AIR LIQUEFACTION
WARNING: HIGH PRESSURE OXIDIZING GAS, VIGOROUSLY ACCELERATES COMBUSTION. Keep oil and grease away. open valve slowly. Use only with equipment cleaned for oxygen service and rated for cylinder pressure. Cylinder temperature should not exceed 125 degrees F (52 degrees C). CLOSR VALVE TIGHTLY AND REPLACE CYLINDER CAP WHEN NOT IN USE AND WHEN EMPTY. Use in accordance with supplier's MATERIAL SAFETY DATA SHEET.
IN CASE OF EMERGENCY: CALL CHEMTREC 1-800-424-9300
WARNING:FOR EMERGENCY USE ONLY WHEN ADMINISTERED BY PROPERLY TRAINED PERSONNEL FOR OXYGEN DEFICIENCY AND RESUSCITATION. FOR ALL OTHER MEDICAL APPLICATIONS, (Rx ONLY). Use only as directed by a licensed practitioner. Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content of arterial blood, may be harmful. Use only with pressure reducing equipment and apparatus designed for oxygen.
DO NOT REMOVE THIS LABEL

South Jersey Welding Supply CERTIFICATE OF ANALYSIS OXYGEN (USP) CUSTOMER This letter is to provide you with the certification you requested for Oxygen, USP, Lot# ________________ supplied to you in cylinder / vessels by our location. These cylinders were filled in accordance with the Standard Operating Procedures utilized for the manufacture of Medical Gases. By following these procedures, our location ensures that products are safely manufactured in compliance with the FDA's Current Good Manufacturing Practices (cGMP) Regulations. CAUTION: Vendor supplies this certification to customer to assist customer in ensuring compliance with 21 CFR 211.84. This certification does not eliminate customer's obligation to comply with other portions of 21 CFR 210 and 211, including but not limited to 21 CFR 211.265 (finished product testing) for cylinders and vessels filled from these supply cylinders. These cylinders are not certfiied for instrument calibration purposes.
Test Requirements USP Specification Lot Analysis
IdentifIcation Pass
Odor Pass
Carbon Dioxide Less than 0.03%
Carbon Monoxide Less than 0.001%
Assay Greater than 99.0%
NOTE: The USP/NF exempts facilities that manufacture Oxygen USP by the Air Liquefaction Process from the test for Carbon Dioxide and Carbon Monoxide. As our label states, the Oxygen USP being supplied is manufactured by the Air Liquefaction Process. The methodology being used to perform the USP / NF test for Assay is the Servomex Model 0A244D Supplier Signature __________________________ Date ___________________
EXP 00-0000
SOUTH JERSEY
SCF 0000
WELDING SUPPLY
LOT 00000000
DO NOT REMOVE THIS LABEL
Rx ONLY
OXYGEN REFRIGERATED LIQUID USP UN1073 OXYGEN 2 CAS: 77-82-44-7
WARNING! EXTREMELY COLD OXIDIZING LIQUID AND GAS. VIGOROUSLY ACCELERATES COMBUSTION. CAN CAUSE SEVERE FROSTBITE. COMBUSTIBLES IN CONTACT WITH LIQUID OXYGEN MAY EXPLODE ON IGNITION OR IMPACT.
Do not drop. use hand truck for container movement. Keep oil and grease, and combustibles away. Keep away from heat, flame. and sparks. Use with equipment cleaned for oxygen service. Do not get liquid in eyes, on skin, or clothing. For liquid withdrawal, wear face shield or goggles, and gloves. Avoid spills. Do not walk on or roll equipment over spills. Store and use with adequate ventilation to prevent oxygen accumulation. Close valve when not in use and when empty. Container discharge must be warmed to room temperature before breathing. FIRST AID: IN CASE OF FROSTBITE, obtain medical treatment immediately.
IN CASE OF EMERGENCY: CALL 1-800-424-9300
For emergency use only when administered by properly trained personnel for oxygen deficiency and resuscitation. For all other medical applications, Rx only.
Uninterrupted use of high concentrations of oxygen over a long duration, without monitoring its effect on oxygen content or arterial blood may be harmful. Use only with pressure reducing equipment and apparatus designed for oxygen. Do not attempt to use on patients who have stopped breathing unless in conjunction with resuscitative equipment.
OXYGEN BY AIR LIQUEFACTION. DO NOT REMOVE THIS PRODUCT LABEL. FILLED BY SOUTH JERSEY WELDING SUPPLY VINELAND, NJ PMG-9USP (10/93)
ALWAYS KEEP CONTAINER IN UPRIGHT POSITION
Lot Number _________
Manufacturer
South Jersey Welding Supply
Active Ingredients
Source
- U.S. National Library of Medicine
- DailyMed
- Last Updated: 18 May 2013
Drugs and Medications
Oxygen [Norton Sound Health Corporation]
Oxygen, Compressed
Liquid Oxygen
Oxygen [Reliance Oxygen & Equipment]
Oxygen [Cranston Welding Supply Company]
Oxygen [Two MP Investments, Inc. dba Respicare]
Oxygen
Clinical Trials
Effect of High Levels of Oxygen and Smoking on the Lungs in Human Volunteers
Patients with lung disease experiencing difficulty breathing can be treated with oxygen therapy. This involves the delivery of "extra" oxygen by a face-mask or through small tubes placed...
Oxygen Portable Concentrator During Exercises in Patients With COPD
The purpose of this study is to compare differences in oxygen delivery between portable oxygen concentrators (POCs) and liquid oxygen (LOs) portable units, pose a question if POCs are equa...
Pre-flight Titration of Supplemental Oxygen
The purpose of this study is to evaluate if supplemental oxygen during air travel can be reliably titrated using a Hypoxia-altitude simulation test (HAST). Also, the effect of oxygen suppl...
To compare the efficacy of long-term use of nocturnal oxygen therapy (12 hours) with that of continuous, low-flow oxygen therapy (24 hours) in patients with chronic hypoxic lung disease.
Study Question: In infants who are born at gestational ages of 23 0/7 to 27 6/7 weeks, does lowering the concentration of supplemental oxygen to target an arterial oxygen saturation by pul...
PubMed Articles
Collision induced absorption in the a(1)Δ(v = 2) ←X(3)Σ(v = 0) band of molecular oxygen.
Using cavity ring-down spectroscopy we measured the collision induced absorption spectrum associated with the a(1)Δ(v = 2) ←X(3)Σ(v = 0) band of oxygen near 922 nm both in pure oxygen and in mixtu...
Efficient fluorescence "turn-on" sensing of dissolved oxygen by electrochemical switching.
We report on a novel method for sensing oxygen that is based on the use of a perylene diimide dye (1) which is electrochemically reduced to its non-fluorescent dianion form (12-). In the presence of o...
Electrical conductivity and oxygen permeation rates in Co-doped Sr(3) Ti(2) O(7-δ) with Ruddesden-Popper type structures were investigated. The effects of metal dopants (M) in the Ti site of Sr(3) Ti...
First principles study of oxygen adsorption and dissociation on the Pd/Au surface alloys.
The formation of Pd/Au surfaces and their catalytic performance toward oxygen dissociation were investigated using periodic density functional methods. We show that Pd can readily incorporate into the...
The goal of oxygen therapy is to deliver sufficient oxygen to the tissues while minimizing oxygen toxicity and oxidative stress. It remains uncertain what values of arterial oxygen saturations achieve...