Advertisement

Topics

Biomechanical Analysis of the Fixation System for T-Shaped Acetabular Fracture.

07:00 EST 1st January 2000 | BioPortfolio

Summary of "Biomechanical Analysis of the Fixation System for T-Shaped Acetabular Fracture."

This study aims to evaluate the biomechanical mechanism of fixation systems in the most frequent T-shaped acetabular fracture using finite element method. The treatment of acetabular fractures was based on extensive clinical experience. Three commonly accepted rigid fixation methods (double column reconstruction plates (P × 2), anterior column plate combined with posterior column screws (P + PS), and anterior column plate combined with quadrilateral area screws (P + QS)) were chosen for evaluation. On the basis of the finite element model, the biomechanics of these fixation systems were assessed through effective stiffness levels, stress distributions, force transfers, and displacements along the fracture lines. All three fixation systems can be used to obtain effective functional outcomes. The third fixation system (P + QS) was the optimal method for T-shaped acetabular fracture. This fixation system may reduce many of the risks and limitations associated with other fixation systems.

Affiliation

Journal Details

This article was published in the following journal.

Name: Computational and mathematical methods in medicine
ISSN: 1748-6718
Pages: 370631

Links

DeepDyve research library

PubMed Articles [24258 Associated PubMed Articles listed on BioPortfolio]

Four Screws Diamond Configuration Fixation for Displaced, Comminuted Intracapsular Fracture Neck Femur in Young Adults.

Four cannulated cancellous screws (CCS) in diamond configuration have been recommended by some authors for fixation of intracapsular neck of femur (ICNF) fracture with posterior comminution in adults....

3D surgical printing for preoperative planning of trabecular augments in acetabular fracture sequel.

We describe the methodical and possibilities of 3D surgical printing in preoperative planning for a total hip arthroplasty in acetabular deformity after acetabular fractures, showing a case of a 43-ye...

Biomechanical analysis on of anterior transpedicular screw-fixation after two-level cervical corpectomy using finite element method.

Anterior cervical trans-pedicle screw fixation was introduced to overcome some of the disadvantages associated with anterior cervical corpectomy and fusion. In vitro biomechanical studies on the trans...

Femoral Neck Fracture Fixation with a Medial Buttress Plate That Led to Impingement with Hip Flexion: A Case Report.

A 47-year-old man with an isolated femoral neck fracture was treated with open reduction and internal fixation with a medial femoral neck buttress plate and a dynamic hip screw. Union was achieved wit...

Mechanical effect of different implant CCD angles on the fracture surface after fixation of an unstable intertrochanteric fracture: A finite element analysis.

The choice of implant is one of the most easily controllable factors affecting the outcome of intertrochanteric fractures. While most of the caput-collum-diaphysis (CCD) angles of the femur are within...

Clinical Trials [7195 Associated Clinical Trials listed on BioPortfolio]

Stability of Angle Fracture Fixation With (K) Shaped Titanium Miniplates Versus Two Miniplates

In patients with angle fracture , will the (K) shaped titanium miniplates provide more stable fixation than two conventional miniplates? Many studies have been conducted to compare between...

Geriatric Acetabular fracTures: Open Reduction Internal Fixation Versus Replacement

Management of acetabular (hip) fractures in the geriatric population can be very challenging because of osteoporosis, comminution and an increased risk for loss of reduction. Post-operati...

Identification of an Atypical acetabuLar frActure With an Independent Roof Component: Incidence and Description

Treatment of acetabular fractures needs a perfect diagnosis to anticipate surgical difficulties. E. Letournel described a rare atypical both-column fracture which " introduces enormous sur...

Anatomical and Biomechanical Study About Stability in Galeazzi´s Fracture

Most Galeazzi fractures can be treated adequately with open reduction and internal fixation (ORIF) of the radius alone, but some will remain unstable at the DRUJ and require repair of the ...

OsseoFix™ Spinal Fracture Reduction System in Treating Spinal Compression Fracture

The OsseoFix Spinal Fracture Reduction System facilitates the treatment of spinal fractures by providing internal fixation and stabilization using a titanium implant in conjunction with Os...

Medical and Biotech [MESH] Definitions

Implantable fracture fixation devices attached to bone fragments with screws to bridge the fracture gap and shield the fracture site from stress as bone heals. (UMDNS, 1999)

The joining of objects by means of a cement (e.g., in fracture fixation, such as in hip arthroplasty for joining of the acetabular component to the femoral component). In dentistry, it is used for the process of attaching parts of a tooth or restorative material to a natural tooth or for the attaching of orthodontic bands to teeth by means of an adhesive.

The use of metallic devices inserted into or through bone to hold a fracture in a set position and alignment while it heals.

The use of internal devices (metal plates, nails, rods, etc.) to hold the position of a fracture in proper alignment.

The use of nails that are inserted into bone cavities in order to keep fractured bones together.

Advertisement
Quick Search
Advertisement
Advertisement

 


DeepDyve research library

Relevant Topics

Osteoporosis
Osteoporosis is a disease in which the bones become extremely porous, are subject to fracture, and heal slowly, occurring especially in women following menopause and often leading to curvature of the spine from vertebral collapse. Follow and track&n...

Stress
Stress is caused by your perception of situations around you and then the reaction of your body to them. The automatic stress response to unexpected events is known as 'fight or flight'. Discovered by Walter Cannon in 1932, it is the release of h...


Searches Linking to this Article