3D Metal Printing - Additive Manufacturing Technologies for Frameworks of Implant-Borne Fixed Dental Prosthesis.

08:00 EDT 1st September 2017 | BioPortfolio

Summary of "3D Metal Printing - Additive Manufacturing Technologies for Frameworks of Implant-Borne Fixed Dental Prosthesis."

An edentulous patient was rehabilitated with maxillary metal-ceramic and mandibular metal-resin implant-supported fixed dental prosthesis (FDP). Metal frameworks of the FDPs were fabricated using 3D additive manufacturing technologies utilizing selective laser melting (SLM) and electron beam melting (EBM) processes. Both SLM and EBM technologies were employed in combination with computer numerical control (CNC) post-machining at the implant interface. This report highlights the technical and clinical protocol for fabrication of FDPs using SLM and EBM additive technologies.


Journal Details

This article was published in the following journal.

Name: The European journal of prosthodontics and restorative dentistry
ISSN: 0965-7452
Pages: 143-147


DeepDyve research library

PubMed Articles [8600 Associated PubMed Articles listed on BioPortfolio]

Novel Biomaterials Used in Medical 3D Printing Techniques.

The success of an implant depends on the type of biomaterial used for its fabrication. An ideal implant material should be biocompatible, inert, mechanically durable, and easily moldable. The ability ...

Computational Fluid Dynamics and Additive Manufacturing to Diagnose and Treat Cardiovascular Disease.

Noninvasive engineering models are now being used for diagnosing and planning the treatment of cardiovascular disease. Techniques in computational modeling and additive manufacturing have matured conc...

3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors.

Computer-aided fabrication technologies combined with simulation and data processing approaches are changing our way of manufacturing and designing functional objects. Also in the field of catalytic t...

Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators.

The significant improvements observed in the field of bulk-production of printed microchip technologies in the past decade have allowed the fabrication of microchip printing on numerous materials incl...

Recent Advances in Extrusion-Based 3D Printing for Biomedical Applications.

Additive manufacturing, or 3D printing, has become significantly more commonplace in tissue engineering over the past decade, as a variety of new printing materials have been developed. In extrusion-b...

Clinical Trials [2001 Associated Clinical Trials listed on BioPortfolio]

Clinical Application of Personal Designed 3D Printing Implants in Bone Defect Restoration

Objective: Clinical application of 3D printing implant in bone defect treatment. Study design: multicenter randomized controlled study . Methods:patients randomly grouped according to reg...

Metal-on-metal Hip Replacement MRI Study

This study is being conducted to determine the rate of symptomatic and asymptomatic nonmalignant, noninfective soft tissue mass presence (referred to in the literature as pseudotumour, ALV...

Metal Ion Release From an FDA-Approved Metal-on-Metal Total Hip Replacement Implant

This is a multi-center, randomized study to compare blood and urine cobalt, chromium, and titanium ion levels of a metal-on-metal articular bearing coupled with two different head sizes to...

Evaluating Enhanced Metal Reduction Techniques for Definitive CT Scanning to Assess Spinal Fusion With Trabecular Metal Implants (TM-Ardis)

To determine if the subject metal reduction software helps to better visualize bone interphase and fusion reliability, and assess whether the appropriate procedural modification facilitate...

Metallosis on Tissues and Serum Metal Levels in Children

Slightly elevated blood metal levels have been found in adults undergoing hip and knee replacement. It is unknown whether pediatric patients with metal implant(plates/screws/rods) have ele...

Medical and Biotech [MESH] Definitions

A chelating agent (CHELATING AGENTS) that sequesters a variety of polyvalent cations. It is used in pharmaceutical manufacturing and as a food additive.

Insertion of an implant into the bone of the mandible or maxilla. The implant has an exposed head which protrudes through the mucosa and is a prosthodontic abutment.

Endosseous dental implantation where implants are fitted with an abutment or where an implant with a transmucosal coronal portion is used immediately (within 1 week) after the initial extraction. Conventionally, the implantation is performed in two stages with more than two months in between the stages.

The plan and delineation of DENTAL IMPLANT fitting with DENTAL ABUTMENT.

An infectious disease clinically similar to epidemic louse-borne typhus (TYPHUS, EPIDEMIC LOUSE-BORNE), but caused by RICKETTSIA TYPHI, which is transmitted from rat to man by the rat flea, Xenopsylla cheopis.

Quick Search


DeepDyve research library

Relevant Topics

Dentistry is the study, management and treatment of diseases and conditions affecting the mouth, jaw, teeth and their supporting tissues (Oxford Medical Dictionary) The work of a dentist ranges from regular patient check-up to orthodontics and surgery....

Arthroplasty is a surgical procedure to restore the integrity and function of a joint. A joint can be restored by resurfacing the bones. An artificial joint (called a prosthesis) may also be used. Various types of arthritis may affect the joints. Osteo...

Searches Linking to this Article