Track topics on Twitter Track topics that are important to you
One of the most important goals of research on three-dimensional nonscanning laser imaging systems is the improvement of the illumination system. In this paper, a new three-dimensional nonscanning laser imaging system based on the illumination pattern of a point-light-source array is proposed. This array is obtained using a fiber array connected to a laser array with each unit laser having independent control circuits. This system uses a point-to-point imaging process, which is realized using the exact corresponding optical relationship between the point-light-source array and a linear-mode avalanche photodiode array detector. The complete working process of this system is explained in detail, and the mathematical model of this system containing four equations is established. A simulated contrast experiment and two real contrast experiments which use the simplified setup without a laser array are performed. The final results demonstrate that unlike a conventional three-dimensional nonscanning laser imaging system, the proposed system meets all the requirements of an eligible illumination system. Finally, the imaging performance of this system is analyzed under defocusing situations, and analytical results show that the system has good defocusing robustness and can be easily adjusted in real applications.
This article was published in the following journal.
Name: The Review of scientific instruments
Illumination uniformity in photolithography systems determines the dimensional difference across the entire lithographic substrate. However, traditional lithography system relies on expensive and comp...
The potential adulteration of foodstuffs has led to increasing concern regarding food safety and security, in particular for powdered food products where cheap ground materials or hazardous chemicals ...
We derive analytic expressions for the three-dimensional coherent transfer function (CTF) and coherent spread function (CSF) for coherent holographic image reconstruction by phase transfer (CHIRPT) mi...
Localized plasmonic structured illumination microscopy (LPSIM) provides multi-color wide-field super resolution imaging with low phototoxicity and high-speed capability. LPSIM utilizes a nanoscale pla...
A laser's high degree of coherence leads to interferences, which - in the absence of precautions - can cause severe image distortions such as fringes and speckles and which thereby strongly hamper a m...
The goal of this research project is to develop a new system that uses lasers to provide 3-dimensional (3-D) images of the cervical spine (the seven spinal bones in the neck) in a moving p...
Traditionally, laparoscopy has been based on 2-dimensional (2D) imaging, which has represented a considerable challenge for those approaching this technique. Thus, 3-dimensional (3D) visua...
The adenoma detection rate by colonoscopy for asymptomatic individuals aged 50 years and older is estimated to be at least 25%. It is known that during colonoscopy, lesions may be missed. ...
The purpose of this study is to determine if a novel, unique, non-contact optical imaging device(camera) developed at the Beckman Laser Institute (BLI), called Modulated Imaging (MI), can ...
Confocal laser endomicroscopy (CLE) is a newly endoscopic device that enables microscopic view of the digestive tract. The purpose of this study is to determine if confocal laser endomicro...
The process of generating three-dimensional images by electronic, photographic, or other methods. For example, three-dimensional images can be generated by assembling multiple tomographic images with the aid of a computer, while photographic 3-D images (HOLOGRAPHY) can be made by exposing film to the interference pattern created when two laser light sources shine on an object.
Descriptive anatomy based on three-dimensional imaging (IMAGING, THREE-DIMENSIONAL) of the body, organs, and structures using a series of computer multiplane sections, displayed by transverse, coronal, and sagittal analyses. It is essential to accurate interpretation by the radiologist of such techniques as ultrasonic diagnosis, MAGNETIC RESONANCE IMAGING, and computed tomography (TOMOGRAPHY, X-RAY COMPUTED). (From Lane & Sharfaei, Modern Sectional Anatomy, 1992, Preface)
Three-dimensional computed tomographic imaging with the added dimension of time, to follow motion during imaging.
Echocardiography amplified by the addition of depth to the conventional two-dimensional ECHOCARDIOGRAPHY visualizing only the length and width of the heart. Three-dimensional ultrasound imaging was first described in 1961 but its application to echocardiography did not take place until 1974. (Mayo Clin Proc 1993;68:221-40)
A technique utilizing a laser coupled to a catheter which is used in the dilatation of occluded blood vessels. This includes laser thermal angioplasty where the laser energy heats up a metal tip, and direct laser angioplasty where the laser energy directly ablates the occlusion. One form of the latter approach uses an EXCIMER LASER which creates microscopically precise cuts without thermal injury. When laser angioplasty is performed in combination with balloon angioplasty it is called laser-assisted balloon angioplasty (ANGIOPLASTY, BALLOON, LASER-ASSISTED).
A diagnostic test is any kind of medical test performed to aid in the diagnosis or detection of disease. For example: to diagnose diseases to measure the progress or recovery from disease to confirm that a person is free from disease Clin...