Digital workflow for the design and additively manufacture of a splinted framework and custom tray for the impression of multiple implants: A dental technique.

08:00 EDT 29th June 2018 | BioPortfolio

Summary of "Digital workflow for the design and additively manufacture of a splinted framework and custom tray for the impression of multiple implants: A dental technique."

This article describes a step-by-step digital protocol for the design and fabrication, through additive manufacturing, of a splinted framework and a custom tray for the impression of a complete-arch prosthesis supported by multiple implants. The protocol presented uses open source software to control the thicknesses of the custom tray, splinting material, and impression material during the procedure, reducing laboratory and chairside time and costs.


Journal Details

This article was published in the following journal.

Name: The Journal of prosthetic dentistry
ISSN: 1097-6841


DeepDyve research library

PubMed Articles [9297 Associated PubMed Articles listed on BioPortfolio]

Additive Manufacture of Composite Soft Pneumatic Actuators.

This article presents a direct additive manufacturing method for composite material soft pneumatic actuators that are capable of performing a range of programmable motions. Commonly, molding is the me...

Integrating Taxonomies Into Theory-Based Digital Health Interventions for Behavior Change: A Holistic Framework.

Digital health interventions (DHIs) have been emerging in the last decade. Due to their interdisciplinary nature, DHIs are guided and influenced by theories (eg, behavioral theories, behavior change t...

Digital Workflow: From Guided Surgery to Final Full-Arch Implant Prosthesis in Three Visits.

The purpose of this article is to report a digital workflow protocol for full-arch implant rehabilitation from guided surgery to final prosthesis in only three visits. This expedited protocol allows f...

An expandable approach for design and personalization of digital, just-in-time adaptive interventions.

We aim to deliver a framework with 2 main objectives: 1) facilitating the design of theory-driven, adaptive, digital interventions addressing chronic illnesses or health problems and 2) producing pers...

Prospective Design, Rapid Prototyping, and Testing of Smart Dressings, Drug Delivery Patches, and Replacement Body Parts Using Microscopy Aided Design and ManufacturE (MADAME).

Natural materials exhibit smart properties including gradients in biophysical properties that engender higher order functions, as well as stimuli-responsive properties which integrate sensor and/or ac...

Clinical Trials [2304 Associated Clinical Trials listed on BioPortfolio]

Evaluation of the Accuracy of Full Digital Workflow for Guided Implant Surgery Using the R2 Gate Software

The primary aim of the present study is to compare the accuracy of a full digital workflow for dental implants insertion to a partially digital workflow, for a limited edentulous space (1 ...

Benefit of the Digital Workflow for Screw-retained Single Implant Restorations

The aim of this research project is emphasize the benefit of the digital workflow compared to conventional impressions and crown processing with standard la procedures. The objectives of t...

CF41102 5-year Clinical Evaluation of Conelog® Implant With 7 mm Length

The objective of this prospective, randomized, pilot study is to determine whether the Conelog® connection is suitable for splinted/non-splinted cemented crowns in the chewing centre (foc...

Effects of Splinted or Non-splinted Single-unit Crowns on Marginal Bone-level Alterations Around Implants

The microthreaded and platform switched implants could control the stress in the suitable range. The splint would disturb the function. So it is necessary to know whether the splinted sing...

Research in the Development of a New Type of Digital Dermatoscope for Skin Cancer

This is a multicenter prospective observational clinical investigation with a medical device. The purpose of this study is to develop and validate of a new type of digital dermatoscope wit...

Medical and Biotech [MESH] Definitions

The plan, delineation, and location of actual structural elements of dentures. The design can relate to retainers, stress-breakers, occlusal rests, flanges, framework, lingual or palatal bars, reciprocal arms, etc.

The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.

Design, development, manufacture, and operation of heavier-than-air AIRCRAFT.

Application of principles and practices of engineering science to the transformation, design, and manufacture of substances on an industrial scale.

That segment of commercial enterprise devoted to the design, development, and manufacture of chemical products for use in the diagnosis and treatment of disease, disability, or other dysfunction, or to improve function.

Quick Search


DeepDyve research library

Relevant Topics

Dentistry is the study, management and treatment of diseases and conditions affecting the mouth, jaw, teeth and their supporting tissues (Oxford Medical Dictionary) The work of a dentist ranges from regular patient check-up to orthodontics and surgery....

Arthroplasty is a surgical procedure to restore the integrity and function of a joint. A joint can be restored by resurfacing the bones. An artificial joint (called a prosthesis) may also be used. Various types of arthritis may affect the joints. Osteo...

Searches Linking to this Article