Mechanical stability of zirconia meso-abutments bonded to titanium bases restored with different monolithic all-ceramic crowns.

08:00 EDT 1st April 2019 | BioPortfolio

Summary of "Mechanical stability of zirconia meso-abutments bonded to titanium bases restored with different monolithic all-ceramic crowns."

To evaluate the bending moments and failure modes of zirconia meso-abutments bonded to titanium bases restored with different monolithic all-ceramic crowns after aging, and to compare them to titanium abutments restored with all-ceramic crowns.


Journal Details

This article was published in the following journal.

Name: The International journal of oral & maxillofacial implants
ISSN: 1942-4434


DeepDyve research library

PubMed Articles [8199 Associated PubMed Articles listed on BioPortfolio]

Influence of Different CAD/CAM Crown Materials on the Fracture of Custom-Made Titanium and Zirconia Implant Abutments After Artificial Aging.

To investigate the effects of different commercially available computer-aided design/computer-assisted manufacturing (CAD/CAM) materials for fabrication of molar crowns, including polyetheretherketone...

Debonding Forces for Two-Piece Zirconia Abutments with Implant Platforms of Different Diameter and Use of Different Luting Strategies.

The forces needed to detach zirconia copings from titanium inserts of two-piece abutments were evaluated for implant platforms of different diameters (4.8 and 6.5 mm) and different luting strategies.

Fracture Resistance of Titanium, Zirconia, and Ceramic-Reinforced Polyetheretherketone Implant Abutments Supporting CAD/CAM Monolithic Lithium Disilicate Ceramic Crowns After Aging.

The purpose of this study was to compare the fracture resistances and the fracture types of titanium, zirconia, and ceramic-reinforced polyetheretherketone (PEEK) implant abutments supporting CAD/CAM ...

Fretting-corrosion behavior on dental implant connection in human saliva.

Fretting-corrosion has been pointed out as failure mechanism in dental implants between the implant part and the abutment. Depending on countries, surgical habits, 4 combinations of materials, are wel...

Effect of the number of splinted abutments on the accuracy of zirconia copings.

Splinting periodontally or structurally compromised abutments is a common procedure. However, studies that investigated the effect of splinting on the accuracy of zirconia copings are lacking.

Clinical Trials [2370 Associated Clinical Trials listed on BioPortfolio]

Evaluation of the Aesthetic Outcome of Lithium Disilicate (e.Max) All Ceramic Crowns on Titanium Implant Abutments in the Aesthetic Zone After Different Color Masking Approaches

Implants have become the perfect solution for replacement of missing single teeth, partial or even complete edentulism.18 However, the dilemma of anterior implant-supported prosthesis is s...

Patient Satisfaction, Peri-implant Parameters and Crestal Bone Evaluation of PEEK (Polyetheretherketone) Abutments Versus Zirconium Abutments Restored With PEEK Based Superstructure

The aim of the study is to evaluate the patients` satisfaction, peri-implant parameters (bleeding on probing, probing depth and plaque index) and crestal bone resorption of implants restor...

Two-Piece Zirconia Dental Implant vs Two-Piece Titanium Dental Implant- Randomized Clinical Control Trial

2 Arms (60 subjects - 30 each arm). Experimental group with two-pice zirconia dental implant and Control group with two-piece titanium dental implant Evaluate Changes in inflammatory and m...

Zirconia Based Fixed Dental Prostheses

The objective of this prospective clinical study is to investigate the differences in the complication rates between tooth- and implant- supported zirconia based fixed dental prostheses (F...

Prosthetic Complications of Screw Retained Restoration

On of the main fixed prosthetic options of completely edentulous patients is the screw-retained implant supported prosthesis which was constructed on transmucosal abutments with its encoun...

Medical and Biotech [MESH] Definitions

Higher-order DNA and RNA structures formed from guanine-rich sequences. They are formed around a core of at least 2 stacked tetrads of hydrogen-bonded GUANINE bases. They can be formed from one two or four separate strands of DNA (or RNA) and can display a wide variety of topologies, which are a consequence of various combinations of strand direction, length, and sequence. (From Nucleic Acids Res. 2006;34(19):5402-15)

A commonly used prosthesis that results in a strong, permanent restoration. It consists of an electrolytically etched cast-metal retainer that is cemented (bonded), using resins, to adjacent teeth whose enamel was previously acid-treated (acid-etched). This type of bridgework is sometimes referred to as a Maryland bridge.

Sequences within RNA that regulate the processing, stability (RNA STABILITY) or translation (TRANSLATION, GENETIC) of RNA.

A yellow pigment that accumulates in the MACULA LUTEA. It is composed of LUTEIN, meso-zeaxanthin, and ZEAXANTHIN.

Mechanical devices used to produce or assist pulmonary ventilation.

Quick Search


DeepDyve research library

Searches Linking to this Article