Computer-Assisted Surgery Using 3D Printed Saw Guides for Acute Correction of Antebrachial Angular Limb Deformities in Dogs.

08:00 EDT 9th April 2019 | BioPortfolio

Summary of "Computer-Assisted Surgery Using 3D Printed Saw Guides for Acute Correction of Antebrachial Angular Limb Deformities in Dogs."

 The aim of this study was to report the use of custom saw guides produced using computed tomographic imaging (CT), computer simulation and three-dimensional (3D) printing to aid surgical correction of antebrachial deformities in six dogs.


Journal Details

This article was published in the following journal.

Name: Veterinary and comparative orthopaedics and traumatology : V.C.O.T
ISSN: 2567-6911


DeepDyve research library

PubMed Articles [19705 Associated PubMed Articles listed on BioPortfolio]

Accuracy of patient-specific three-dimensional-printed osteotomy and reduction guides for distal femoral osteotomy in dogs with medial patella luxation.

To compare precorrectional and postcorrectional femoral alignment following distal femoral osteotomy using patient-specific 3-dimensional (3D)-printed osteotomy and reduction guides in vivo and ex viv...

"A Novel Non-invasive Patient-specific Navigation Method for Orbital Reconstructive Surgery: A Phantom Study using Patient Data."

The correction of orbital deformities is an ongoing challenge in maxillofacial surgery. Computer-assisted navigation can improve surgical outcomes. However, conventional registration methods for navig...

Assessment of metal sleeve-free 3D-printed implant surgical guides.

The aim of the present study was to investigate the adaptation and guide hole tolerance of metal sleeve-free computer-assisted implant surgical guides fabricated with 3D printers.

The process of 3D printed skull models for anatomy education.

In general, the 3 D printed medical models are made based on virtual digital models obtained from machines such as the computed tomography scanner. However, due to the limited accuracy of CT scannin...

Computer-Aided Design and Computer-Aided Manufacturing Cutting Guides in Eminoplasty for the Treatment of Temporomandibular Joint Dislocation.

Temporomandibular joint (TMJ) dislocation means the condyle moves out of the normal position. There are several treatments for TMJ dislocation, including conservative treatment, injection treatment, m...

Clinical Trials [13784 Associated Clinical Trials listed on BioPortfolio]

CT Assessment of Minimally Invasive Surgery and Computer Assisted Navigation in Total Knee Arthroplasty

The functional flexion axis of the knee can be established by computer-assisted intra-operative data, through range of motion techniques, not specific landmarks such as epicondyles.

Comparison of Computer-Assisted Navigation and Conventional Instrumentation for Bilateral Total Knee Arthroplasty

To compare the functional outcomes of Computer-Assisted Navigation (CAS) and Conventional Instrumentation TKA at the 8-year follow-up.

Anterior Cruciate Ligament (ACL) Reconstruction Using Different Grafts and Surgical Techniques

ACL reconstruction in the Division of Orthopaedic surgery at Queen's is currently being performed arthroscopically assisted. The resultant function of the reconstructed ligament is greatly...

Computer-assisted Cognitive-Behavior Therapy for Depression in Primary Care

Computer-assisted cognitive-behavior therapy, a treatment that has been shown to be effective in previous studies in psychiatric settings, will be disseminated into primary care - a health...

3D-printed Module-assisted Minimally Invasive Lumbar Pedicle Screw Placement

To explore the accuracy of 3D printed module assisted minimally invasive lumbar pedicle screw placement using Quandrant system, and verify its feasibility of reducing error rate of screw p...

Medical and Biotech [MESH] Definitions

Endoscopic surgical procedures performed with visualization via video transmission. When real-time video is combined interactively with prior CT scans or MRI images, this is called image-guided surgery (see SURGERY, COMPUTER-ASSISTED).

Surgical procedures conducted with the aid of computers. This is most frequently used in orthopedic and laparoscopic surgery for implant placement and instrument guidance. Image-guided surgery interactively combines prior CT scans or MRI images with real-time video.

Computer-assisted study of methods for obtaining useful quantitative solutions to problems that have been expressed mathematically.

Computer-assisted processing of electric, ultrasonic, or electronic signals to interpret function and activity.

Computer-assisted mathematical calculations of beam angles, intensities of radiation, and duration of irradiation in radiotherapy.

Quick Search


DeepDyve research library

Relevant Topic

Surgical treatments
Surgery is a technology consisting of a physical intervention on tissues. All forms of surgery are considered invasive procedures; so-called "noninvasive surgery" usually refers to an excision that does not penetrate the structure being exci...

Searches Linking to this Article