Chemical Vapor Deposition Method Grown All-Inorganic Perovskite Microcrystals for Self-Powered Photodetectors.

08:00 EDT 9th April 2019 | BioPortfolio

Summary of "Chemical Vapor Deposition Method Grown All-Inorganic Perovskite Microcrystals for Self-Powered Photodetectors."

Self-powered photodetectors (SPPDs) have attracted lots of attention due to their various advantages including no external power sources, high-sensitivity, fast response speed and so on. This study reports the fabrication and characterization results of CsPbBr3 microcrystals (MCs) grown by chemical vapor deposition (CVD) method, and the SPPDs have been fabricated on the basis of the CsPbBr3 MCs layer with the sandwich structure of GaN/CsPbBr3 MCs/ZnO. Such designed SPPD shows the detectivity (D*) of 1014 Jones, on/off ratio of up to 105, peak responsivity (R) of 89.5 mA/W and enhanced stability at the incident wavelength of 540 nm. The photodetector enables the fast photoresponse speed of 100 μs rise time and 140 μs decay time. The performances of the SPPD are comparable to the best ones ever reported for CsPbBr3 based PDs but no need external power supplies, which mainly benefits from the low trap density, long carrier diffusion of high quality CsPbBr3 MCs film and the built-in electric fields in the sandwich structure of GaN/CsPbBr3/ZnO layers.


Journal Details

This article was published in the following journal.

Name: ACS applied materials & interfaces
ISSN: 1944-8252


DeepDyve research library

PubMed Articles [16863 Associated PubMed Articles listed on BioPortfolio]

Vertically-aligned graphene nanowalls grown via plasma-enhanced chemical vapor deposition as a binder-free cathode in Li-O2 batteries.

In the present report, vertically-aligned graphene nanowalls are grown on Ni-foam (VA-G/NF) using plasma-enhanced chemical vapor deposition (PECVD) method at room temperature. Optimization of the grow...

Open-source automated chemical vapor deposition system for the production of two- dimensional nanomaterials.

The study of two- dimensional (2D) materials is a rapidly growing area within nanomaterials research. However, the high equipment costs, which include the processing systems necessary for creating the...

Inkjet Printing All Inorganic Halide Perovskite Inks for Photovoltaic Applications.

A method for synthesizing photoactive inorganic perovskite quantum dot inks and an inkjet printer deposition method, using the synthesized inks, are demonstrated. The ink synthesis is based on a simp...

Chemical vapor deposition growth of vertical MoS2 nanosheets on p-GaN nanorods for photodetector application.

Vertically oriented multi-layered MoS2 nanosheets were successfully grown on p-GaN nanorod substrate using chemical vapor deposition (CVD) method. The p-GaN nanorod substrate was fabricated by dry etc...

Room Temperature Processing of Inorganic Perovskite Films to Enable Flexible Solar Cells.

Inorganic lead halide perovskite materials have attracted great attention recently due to their potential for greater thermal stability compared with hybrid organic perovskites. However, the high proc...

Clinical Trials [2848 Associated Clinical Trials listed on BioPortfolio]

Vapor Ablation for Localized Cancer Lesions

This study is a prospective, single-arm, multi-center, pilot trial of Bronchoscopic Thermal Vapor Ablation for Lung Cancer (BTVA-C) in patients with primary lung cancer or metastatic cance...

Sinus Lift With Newly Forming Bone and Inorganic Bovine Bone

The aim of this study is to evaluate the efficacy of newly forming bone graft (NFB) in the gain of bone volume in sinus lift procedures. For that, it will be compared the tomographic bone ...

The Use of Inorganic Nitrate for the Prevention of Contrast-induced Nephropathy

Contrast-induced nephropathy (CIN), an acute kidney injury resulting from the administration of intravascular iodinated contrast media, is an important cause of morbidity/mortality followi...

Vapor Ablation for Localized Cancer Lesions of the Lung (VAPORIZE)

This study is a prospective, single-arm, multi-center, pilot trial of Bronchoscopic Thermal Vapor Ablation for Lung Cancer (BTVA-C) in patients with primary lung cancer or metastatic cance...

Minimally Invasive Prostatic Vapor Ablation for the Treatment of BPH in Large Prostates (Rezūm XL)

Prospective, multicenter, single arm clinical trial designed to evaluate the safety of the Rezūm System in treating subjects with symptomatic BPH for prostate sizes >80cm3 and ≤150 cm3.

Medical and Biotech [MESH] Definitions

Joint disorders that are characterized by accumulation of microcrystals in and around the joint including in the SYNOVIAL FLUID. They are classified according to the chemical nature of the crystals such as CALCIUM PYROPHOSPHATE; basic CALCIUM PHOSPHATES; and monosodium urate (see URIC ACID).

Disinfectant used in vapor form to sterilize vaccines, grafts, etc. The vapor is very irritating and the liquid form is carcinogenic.

A plant genus of the family BRASSICACEAE that is grown in rock gardens. T. arvense is grown for its large, round ornamental seed pods. The common name of pennycress usually refers to this genus but may also refer to the genus Microthlaspi.

Any of the numerous types of clay which contain varying proportions of Al2O3 and SiO2. They are made synthetically by heating aluminum fluoride at 1000-2000 degrees C with silica and water vapor. (From Hawley's Condensed Chemical Dictionary, 11th ed)

A genus of gram-negative, aerobic, rod-shaped bacteria found in wet soil containing decaying organic material and in water. Cells tend to be pleomorphic if grown on media containing succinate or coccoid if grown in the presence of an alcohol as the sole carbon source. (From Bergey's Manual of Determinative Bacteriology, 9th ed)

Quick Search


DeepDyve research library

Searches Linking to this Article