Topics

915  nm all-fiber laser based on novel Nd-doped high alumina and yttria glass @ silica glass hybrid fiber for the pure blue fiber laser.

08:00 EDT 1st May 2019 | BioPortfolio

Summary of "915  nm all-fiber laser based on novel Nd-doped high alumina and yttria glass @ silica glass hybrid fiber for the pure blue fiber laser."

The fiber laser in the range of 900-1000 nm is essential to generate the blue fiber laser through frequency doubling for the laser display, laser underwater communications, and laser lighting. Yet, the well-developed three-level Yb-doped fiber laser can only realize the blue-green fiber laser at around 490 nm, which is far from the pure blue area (450 nm). To further achieve the pure blue fiber laser, the Nd-doped fiber has emerged as a proper choice to realize a shorter wavelength laser (<920  nm) through the F4→I4 transition of Nd. Here, based on the facile "melt-in-tube" (MIT) method, a novel Nd-doped high alumina and yttria glass @ silica glass hybrid fiber was successfully prepared using the Nd:YAG crystal as the precursor core. The crystal core converts to the amorphous glass state after the drawing process, as evidenced by Raman spectra. The gain coefficient at 915 nm of the hybrid fiber reaches 0.4 dB/cm. Further, the laser oscillation at 915 nm with over 50 dB signal-to-noise ratio was realized by a short 3.5 cm gain fiber. Our results indicate that MIT is a feasible strategy to produce novel fiber for generating fiber laser at special wavelengths.

Affiliation

Journal Details

This article was published in the following journal.

Name: Optics letters
ISSN: 1539-4794
Pages: 2153-2156

Links

DeepDyve research library

PubMed Articles [29330 Associated PubMed Articles listed on BioPortfolio]

Single-frequency self-sweeping Nd-doped fiber laser.

We experimentally demonstrate for the first time, to the best of our knowledge, a Nd-doped fiber laser with wavelength self-sweeping. The main feature of the laser is the generation of periodic micros...

Pump-controlled flexible generation between dissipative soliton and noise-like pulses from a mode-locked Er-doped fiber laser.

We experimentally investigate the alternative generation of dissipative solitons (DSs) or noise-like pulses (NLPs) from a passively mode-locked Er-doped all-fiber laser with a 45° tilted fiber gratin...

Highly efficient thulium-doped high-power laser fibers fabricated by MCVD.

We report a hybrid process by combining both vapor-phase and solution-doping techniques of rare-earth doped preform fabrication in conjunction with the MCVD technique, in order to fabricate highly eff...

Single-frequency gain-switched ytterbium-doped fiber laser at 1017  nm based on dynamic self-induced grating in a saturable absorber.

We report on a stable single-frequency gain-switched ytterbium-doped fiber (YDF) laser at 1017 nm based on saturable absorber (SA) properties. The laser is realized by utilizing a short-length, high-...

Tunable passively Q-switched Dy-doped fiber laser from 2.71 to 3.08  μm using PbS nanoparticles.

We present the first widely tunable passively Q-switched Dy-doped ZBLAN fiber laser around 3 μm pumped at 1.1 μm using PbS nanoparticles as the saturable absorber (SA) to our knowledge. At 2.87 ...

Clinical Trials [8999 Associated Clinical Trials listed on BioPortfolio]

Cementless Alumina-Alumina Total Hip and Hybrid

Evaluate the safety and efficacy of the CeramTec Acetabular Alumina Insert and CeramTec Alumina head when used with the Foundation Porous Coated Acetabular Shell and an Encore hip stem.

Comparison of 1,550-nm Laser and Fractional Radiofrequency Microneedle for the Treatment of Acne Scars in Ethnic Skin

The primary objective of this randomized, split-face, controlled study is to compare the efficacy and safety of a erbium-doped 1,550-nm non-ablative fractional laser and a bipolar fraction...

The Effect of Laser Power and Fiber Traction Speed on the Outcomes of Endovenous Laser Ablation

A clinical randomized controlled trial, comparing of three different regimens of endovenous laser ablation with equal linear endovenous energy density in patients with insufficiency of the...

Comparison of the RevLite Electro-optic Q-Switched Neodymium-doped Yttrium Aluminium Garnet (EO QS Nd:YAG) Laser to a Fractionated Laser System

The purpose of this study is to compare the results of treatment between the side of the face treated with the RevLite Laser and the side of the face treated with a fractionated laser syst...

Thulium Fiber Laser Enucleation of the Prostate (ThuFLEP): Efficacy and Safety

The aim of our study is to estimate the efficacy, safety and postoperative complications of the thulium fiber laser enucleation of the prostate (ThuFLEP) with Urolase system (NTO IRE-POLUS...

Medical and Biotech [MESH] Definitions

Techniques using laser energy in combination with a balloon catheter to perform angioplasty. These procedures can take several forms including: 1, laser fiber delivering the energy while the inflated balloon centers the fiber and occludes the blood flow; 2, balloon angioplasty immediately following laser angioplasty; or 3, laser energy transmitted through angioplasty balloons that contain an internal fiber.

A technique utilizing a laser coupled to a catheter which is used in the dilatation of occluded blood vessels. This includes laser thermal angioplasty where the laser energy heats up a metal tip, and direct laser angioplasty where the laser energy directly ablates the occlusion. One form of the latter approach uses an EXCIMER LASER which creates microscopically precise cuts without thermal injury. When laser angioplasty is performed in combination with balloon angioplasty it is called laser-assisted balloon angioplasty (ANGIOPLASTY, BALLOON, LASER-ASSISTED).

A method of non-invasive, continuous measurement of MICROCIRCULATION. The technique is based on the values of the DOPPLER EFFECT of low-power laser light scattered randomly by static structures and moving tissue particulates.

A TEXTILE fiber obtained from the pappus (outside the SEEDS) of cotton plant (GOSSYPIUM). Inhalation of cotton fiber dust over a prolonged period can result in BYSSINOSIS.

Treatment using irradiation with LASER light of low power intensity so that the effects are not due to heat, as in LASER THERAPY. These non-thermal effects are thought to be mediated by a photochemical reaction that alters CELL MEMBRANE PERMEABILITY, leading to increased mRNA synthesis and CELL PROLIFERATION. Low-level laser therapy has been used for a wide variety of conditions, but most frequently for wound healing and pain control.

Quick Search


DeepDyve research library

Searches Linking to this Article