Microstructure of long period stacking ordered phase in an as-cast Mg-Ni-Zn-Dy alloy.

08:00 EDT 29th April 2019 | BioPortfolio

Summary of "Microstructure of long period stacking ordered phase in an as-cast Mg-Ni-Zn-Dy alloy."

An as-cast Mg-5Ni-4Zn-1Dy (wt.%) alloy was prepared by traditional ingot metallurgy. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) were used to study the microstructural characteristics of 14H LPSO phase in the as-cast Mg-5Ni-4Zn-1Dy (wt.%) alloy. Selected-area electron diffraction, convergent-beam electron diffraction, energy dispersive spectrum and high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) and atomic-resolution energy dispersive spectrum (EDS) mapping were used to study the microscopic characteristics of the 14H LPSO phase. The unit cell of 14H LPSO phase has two ABCA-type building blocks and the Zn, Ni and Dy elements were enriched on the ABCA-type stacking sequence, especially on the B and C layers. Space group of the 14H LPSO phase was determined to be P6mc and atomic structural model was constructed.


Journal Details

This article was published in the following journal.

Name: Micron (Oxford, England : 1993)
ISSN: 1878-4291
Pages: 41-45


DeepDyve research library

PubMed Articles [16761 Associated PubMed Articles listed on BioPortfolio]

The influence of temperature during water-quench rapid heat treatment on the microstructure, mechanical properties and biocompatibility of Ti6Al4V ELI alloy.

This study investigates the influence of a rapid heat treatment followed by water-quenching on the mechanical properties of Ti6Al4V ELI alloy to improve its strength for use in implants. Prior to the ...

Effects of Cu-Coated SiC Content on Microstructure and Properties of Laser Cladding SiC/Al⁻Si Composite Coatings.

SiC particles (SiC)-reinforced Al-Si matrix composite coatings were synthesized on 4032 aluminum alloy by laser cladding using powder mixtures of Al-20 wt.% Si alloy and electroless copper-plated SiC ...

Three-Dimensional Imaging of Phase Ordering in an Fe-Al Alloy by Bragg Ptychography.

We show three-dimensional images of phase ordering in a Fe_{55}Al_{45} alloy obtained by coherent x-ray diffraction Bragg ptychography. Fe-Al alloys display ordered phases where the atoms organize on ...

The Effect of ECAP Temperature on the Microstructure and Properties of a Rolled Rare Earth Magnesium Alloy.

Deformation of an as-rolled rare earth Mg-2Y-0.6Nd-0.6Zr alloy, at different temperatures, was carried out along the BC (90° anticlockwise rotation of the samples after each ECAP pass) route by equal...

TiNiCoSnSb - a new half-Heusler type high-entropy alloy showing simultaneous increase in Seebeck coefficient and electrical conductivity for thermoelectric applications.

A new single phase high entropy alloy, TiNiCoSnSb with half-Heusler (HH) structure is synthesized for the first time by vacuum arc melting (VAM) followed by ball-milling (BM). The BM step is necessary...

Clinical Trials [7756 Associated Clinical Trials listed on BioPortfolio]

Breath and Air Stacking on Respiratory Mechanics in Tracheostomized Patients

The researchers hypothesized that the aid of the resuscitator by the technique Air Stacking increase lung volume, promoting increased lung compliance and improvement of the ventilatory pat...

Short vs Long Arm Cast for Distal Radius Fractures: the Verona Trial

This study prospectively compares the performance of an above-elbow cast (long arm cast) and a below-elbow cast (short arm cast) to maintain reduction in conservatively managed distal radi...

Long-Arm vs Sugar-Tong

The purpose of this study is to determine whether a sugar-tong splint is as effective as a long-arm cast in maintaining reduction of pediatric forearm shaft fractures in a randomized, pros...

Is Univalving or Bivalving of Long Arm Casts for Forearm Fractures Necessary?

This study aims to examine the need for univalve or bivalve splitting of casts in pediatric patients with forearm fractures following closed reduction and cast application in a randomized,...

Cast Sores With Waterproof Vs. Standard Cast Padding

The purpose of this study is to compare waterproof cast padding material to standard cotton/poly-cotton cast padding material to the presence or absence of cast sores of the heel.

Medical and Biotech [MESH] Definitions

The period of the CELL CYCLE following DNA synthesis (S PHASE) and preceding M PHASE (cell division phase). The CHROMOSOMES are tetraploid in this point.

Work that is a report of a pre-planned, usually controlled, clinical study of the safety and efficacy of diagnostic, therapeutic, or prophylactic drugs, devices, or techniques after phase II trials. A large enough group of patients is studied and closely monitored by physicians for adverse response to long-term exposure, over a period of about three years in either the United States or a foreign country.

The initial phase of chronic myeloid leukemia consisting of an relatively indolent period lasting from 4 to 7 years. Patients range from asymptomatic to those exhibiting ANEMIA; SPLENOMEGALY; and increased cell turnover. There are 5% or fewer blast cells in the blood and bone marrow in this phase.

The period of the MENSTRUAL CYCLE representing follicular growth, increase in ovarian estrogen (ESTROGENS) production, and epithelial proliferation of the ENDOMETRIUM. Follicular phase begins with the onset of MENSTRUATION and ends with OVULATION.

The period in the MENSTRUAL CYCLE that follows OVULATION, characterized by the development of CORPUS LUTEUM, increase in PROGESTERONE production by the OVARY and secretion by the glandular epithelium of the ENDOMETRIUM. The luteal phase begins with ovulation and ends with the onset of MENSTRUATION.

Quick Search

DeepDyve research library

Searches Linking to this Article