Topics

Nanoscale nickel metal organic framework decorated over graphene oxide and carbon nanotubes for water remediation.

08:00 EDT 31st August 2019 | BioPortfolio

Summary of "Nanoscale nickel metal organic framework decorated over graphene oxide and carbon nanotubes for water remediation."

In this report, highly crystalline and well-dispersed nano-sized nickel metal organic framework (MOFs) was decorated over graphene oxide (GO) and carbon nanotubes (CNTs) platforms to form hybrid nanocomposites. These as-synthesized hybrid nanocomposites were synthesized through a one-pot green solvothermal method. The prepared nanocomposites were characterized by SEM, TEM, EDS, XRD, FT-IR, Raman and TGA techniques. XRD analysis revealed the crystalline structure of the hybrid nanocomposites. Morphological and elemental studies also verified successful decoration of nickel-benzene dicarboxylate (Ni-BDC) MOFs over GO and CNT platforms. Chemical analysis collected through IR, and thermal analysis collected through TGA technique, illustrated the presence of all the components in the hybrid nanomaterials. Methylene blue (MB) was used as a model organic pollutant to analyze the adsorption capacity of the prepared nanocomposites. According to the findings, a strong interaction exists between the MB molecule and the developed adsorbents at which due to the synergistic effect, the hybrid nanocomposites show several times higher adsorption capacity compared to that of parent materials. This improvement can be due to several reasons: high surface area of the MOFs in the composites resulting from the smaller size of MOFs, presence of the pores formed between the MOFs and the platforms and different morphological characteristic of Ni-BDC MOFs in hybrid nanocomposites, compared to bare Ni-BDC MOFs. Furthermore, the isotherm and kinetic studies revealed that the adsorption of MB onto the newly prepared adsorbents could best be explained by the Langmuir and Pseudo-second order kinetic models. A regeneration study demonstrated the highly stable nature of the hybrid nanocomposites.

Affiliation

Journal Details

This article was published in the following journal.

Name: The Science of the total environment
ISSN: 1879-1026
Pages: 134214

Links

DeepDyve research library

PubMed Articles [12206 Associated PubMed Articles listed on BioPortfolio]

Metal-organic framework derived 3D graphene decorated NaTi(PO) for fast Na-ion storage.

NASCION-type materials featuring super ionic conductivity are of considerable interest for energy storage in sodium ion batteries. However, the issue of inherent poor electronic conductivity of these ...

A hierarchical structured steel mesh decorated with metal organic framework/graphene oxide for high-efficient oil/water separation.

A hierarchical structured steel mesh decorated with metal organic framework (UiO-66-NH) nanoparticles/graphene oxide (GO) nanosheets was successfully prepared via a simple self-assemble method. Becaus...

Highly selective CH and CO capture and magnetic properties of a robust Co-chain based metal-organic framework.

A robust Co-based metal-organic framework, [Co3(L)(OH)2(H2O)4]·2DMF·2H2O (1), was synthesized under solvothermal conditions using pyridyl-decorated tetracarboxylic acid, 2,6-di(2',5'-dicarboxylpheny...

Size-Dependent Mechanical Properties of a Metal-Organic Framework: Increase in Flexibility of ZIF-8 by Crystal Downsizing.

Size engineering is an emerging strategy to modulate the mechanical properties of crystalline materials. Herein, micro- and nano-dimensional single crystals of the prototypical metal-organic framework...

Ultralow-Content Iron-Decorated Ni-MOF-74 Fabricated by a Metal-Organic Framework Surface Reaction for Efficient Electrocatalytic Water Oxidation.

Transition-metal-organic frameworks (MOFs) have been regarded as one of the most intriguing electrocatalysts because of its low cost and diversity in functional organic groups and metal centers. Diffe...

Clinical Trials [1024 Associated Clinical Trials listed on BioPortfolio]

Short Repeated Nickel Exposures

The former Nickel Directive was introduced in EU in 1994 limiting the release of nickel from items intended for prolonged contact with skin. The nickel regulation entered into full force i...

Nickel Allergy and Systemic Nickel Allergy Syndrome in Non Celiac Wheat Sensitivity

In the last few years, a new clinical entity has emerged which includes patients who consider themselves to be suffering from problems caused by wheat and/or gluten ingestion, even though ...

Effect of a Nickel Free Diet and Nickel Sensitization on GERD Patients.

There is little evidence on the effect of a nickel-free diet on gastroesophageal reflux disease (GERD). We hope to determine if a nickel-free diet improves GERD symptoms in patients with a...

Nickel Sensitivity

The purpose of this study is to compare clinical outcomes of patients with self reported nickel sensitivity undergoing primary total knee arthroplasty (TKA) with conventional, standard-of-...

Serum Metal Ion Concentration After Total Knee Arthroplasty (TKA)

All metal implants release metal ions because of corrosion. Total knee arthroplasty implants have large metal surface areas and therefore substantial potential for corrosion. It is planned...

Medical and Biotech [MESH] Definitions

The fusion of ceramics (porcelain) to an alloy of two or more metals for use in restorative and prosthodontic dentistry. Examples of metal alloys employed include cobalt-chromium, gold-palladium, gold-platinum-palladium, and nickel-based alloys.

Nanometer-sized particles that are nanoscale in three dimensions. They include nanocrystaline materials; NANOCAPSULES; METAL NANOPARTICLES; DENDRIMERS, and QUANTUM DOTS. The uses of nanoparticles include DRUG DELIVERY SYSTEMS and cancer targeting and imaging.

Supramolecular networks that consist of ordered arrangements of organic electron donor linkers (usually ditopic or polytopic organic carboxylates) and metal cations. They can have an extremely high surface area and adjustable pore size that allows for the insertion of other molecules capable of various functions such as catalysis, capture of carbon dioxide, and drug delivery.

Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc.

The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.

Quick Search


DeepDyve research library

Searches Linking to this Article