Track topics on Twitter Track topics that are important to you
This study aimed to use scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) to examine the elements that passed into the gastric acid solution after the application of a gastric acid erosive cycle to chitosan modified glass ionomer cement (GIC). Chitosan modified GIC samples were obtained by adding chitosan (vol/vol) of 5 and 10% to GIC for the experimental groups. These two experimental groups and a control group were subjected to gastric acid erosive treatment for 60 s six times a day for 10 days. The sample surfaces were coated with approximately 1 nm of gold to increase conductivity with the Q 150R ES device (Quorum Technologies, East Sussex, England). Surface topography images were obtained with a SEM. Besides, EDS analysis was also determined the number of elements graphically in the region where the fast electron beam hit. In the samples examined, the amount of element was determined. After gastric acid application, cracks and voids were observed on the surfaces of the samples. In the EDS analysis of the 5 and 10% chitosan modified GIC and control groups, Si, Al, Na, and F was found. It is necessary to investigate the antibacterial properties and physical properties of chitosan modified glass ionomer-free elements and fluorine ions using advanced techniques.
This article was published in the following journal.
Name: Microscopy research and technique
This study explores the possibility of adhering gingival tissue to a root surface that was restored with chitosan (CS)-modified glass ionomer cement (GIC) in the case of gingival recessions associated...
To determine the effect of two resin-based coatings on the water sorption/solubility and colour change of three conventional and two resin modified glass ionomer cement restorative materials.
Microenergy dispersive X-ray fluorescence (μ-EDXRF) spectroscopy and scanning electron microscopy (SEM) were used to test the hypothesis that zirconia modified glass ionomer cement (GIC) could improv...
Glass ionomer cement is a widely used luting agent for indirect restorations but presents inferior mechanical properties compared to resin cement due to its low elastic modulus. This study evaluated t...
To evaluate the clinical performance of Glass Carbomer (GC) (GCP Dental) in restoring Class II cavities in primary molars in comparison with resin-modified glass-ionomer cement (RMGIC) and composite r...
The study aim to evaluate the difference between the effect of zinc modified glass ionomer and conventional glass ionomer on the success of partial caries removel technique
The aim of this study is to compare the effect of new bioactive dentine substitute (Biodentine) versus glass ionomer cement in very deep carious lesions clinically and radiographically usi...
The purpose of this split-mouth study was to compare the efficacy of using Bio-active cement versus Packable glass ionomer for cementation of posterior zirconia pediatric crowns.
The aim of the present study is to evaluate the clinical performance of EQUİA restoration material in Class II cavities comparing with a resin-based composite / dentin bonding system.
The aim of this bi-center study was to evaluate the caries-preventive effect of glass ionomer cement (GIC) sealants versus no-intervention on first permanent molars of schoolchildren. The ...
A polymer obtained by reacting polyacrylic acid with a special anion-leachable glass (alumino-silicate). The resulting cement is more durable and tougher than others in that the materials comprising the polymer backbone do not leach out.
Fluoride-releasing restorative materials made by the sintering of metal (usually silver) particles to glass ionomer powder. Glass ionomers are fluoride-releasing cements that are not very durable. Sintering of the metal particles is a means of improving those physical properties that will make the glass ionomer cement more durable.
Composite materials composed of an ion-leachable glass embedded in a polymeric matrix. They differ from GLASS IONOMER CEMENTS in that partially silanized glass particles are used to provide a direct bond to the resin matrix and the matrix is primarily formed by a light-activated, radical polymerization reaction.
A synthetic PGE2 analog that has an inhibitory effect on gastric acid secretion, a mucoprotective effect, and a postprandial lowering effect on gastrin. It has been shown to be efficient and safe in the treatment of gastroduodenal ulcers.
Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.