Fatigue Failure Load of a Bonded Simplified Monolithic Feldspathic Ceramic: Influence of Hydrofluoric Acid Etching and Thermocycling.

07:00 EST 3rd December 2019 | BioPortfolio

Summary of "Fatigue Failure Load of a Bonded Simplified Monolithic Feldspathic Ceramic: Influence of Hydrofluoric Acid Etching and Thermocycling."

To evaluate the effect of hydrofluoric acid (HF) etching and thermocycling (Tc) on fatigue failure load of feldspathic ceramic restorations cemented with two resin cements.


Journal Details

This article was published in the following journal.

Name: Operative dentistry
ISSN: 1559-2863


DeepDyve research library

PubMed Articles [6211 Associated PubMed Articles listed on BioPortfolio]

Fracture Load and Failure Mode of CAD-on Ceramic Structures.

This study evaluated the fracture load (Lf) and the failure mode of CAD-on (Ivoclar Vivadent) ceramic structures, testing the hypotheses that Lf of multilayer structures is governed by the veneering c...

Bond strengths of various resin cements to different ceramics.

This study evaluates the shear bond strength (SBS) of various resin cements to different ceramics. Composite resin cylinders of Z100 were fabricated and cemented to disks of feldspathic ceramic (Creat...

Grinding, polishing and glazing of the occlusal surface do not affect the load-bearing capacity under fatigue and survival rates of bonded monolithic fully-stabilized zirconia simplified restorations.

This study aims to evaluate the effect of distinct surface treatments (grinding, polishing and glaze) of the occlusal surface of fully-stabilized zirconia (FSZ) simplified restorations bonded onto epo...

Fatigue performance of distinct CAD/CAM dental ceramics.

This study investigated the effect of surface roughness (polished vs. CAD/CAM milling roughness simulation) on the fatigue behavior of five dental ceramics for manufacturing CAD/CAM monolithic restora...

Comparison of endocrowns made of lithium disilicate glass-ceramic or polymer-infiltrated ceramic networks and direct composite resin restorations: fatigue performance and stress distribution.

This study compared the fatigue performance and the stress distribution of endodontically treated molars restored with endocrowns obtained with lithium disilicate glass-ceramic or a polymer-infiltrate...

Clinical Trials [6273 Associated Clinical Trials listed on BioPortfolio]

Patient Satisfaction of Glazed IPS Empress CAD Versus Glazed Celtra Duo Ceramic Laminate Veneers

The most frequent reason for failure of laminate veneers made of glass ceramics (feldspathic, leucite based and lithium silicate based ceramics) was fracture of the ceramic, Therefore, cer...

Clinical Performance and Patient Satisfaction of Cerasmart Versus Lithium Disilicate (E-max) Endocrowns

1. RATIONALE All-ceramic endocrowns are bonded to the tooth using adhesive resins creating strong bonds to the tooth structure resulting in strengthening effect and reducing the ...

Removable Partial Denture Abutments Restored With Monolithic Zirconia Crowns

The purpose of this study is to investigate the use of an all-ceramic dental crown material to restore the abutment teeth of partially-edentulous patients who need removable partial dentur...

A Proof of Concept for All-ceramic Zirconia Resin Bonded Bridges for Canine, Premolar and Short Span Posterior Teeth

Trial Design - Objectives and Purpose The aim of this study is to perform a proof of concept for the successful retention and outcome measures of zirconia RBBs for the replacement of missi...

Evaluation of Patient Satisfaction and Color Difference Between Natural Teeth and Monolithic All-ceramic Crowns Fabricated From Celtra Press Treated With Different Surface Finishing Protocols

investigating the effect of glazing and polishing on the color difference between natural teeth and all ceramic crowns made from celtra press (zirconia reinforced lithium silicate ceramic)...

Medical and Biotech [MESH] Definitions

The quantity of measurable virus in a body fluid. Change in viral load, measured in plasma, is sometimes used as a SURROGATE MARKER in disease progression.

A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)

A state arrived at through prolonged and strong contraction of a muscle. Studies in athletes during prolonged submaximal exercise have shown that muscle fatigue increases in almost direct proportion to the rate of muscle glycogen depletion. Muscle fatigue in short-term maximal exercise is associated with oxygen lack and an increased level of blood and muscle lactic acid, and an accompanying increase in hydrogen-ion concentration in the exercised muscle.

A commonly used prosthesis that results in a strong, permanent restoration. It consists of an electrolytically etched cast-metal retainer that is cemented (bonded), using resins, to adjacent teeth whose enamel was previously acid-treated (acid-etched). This type of bridgework is sometimes referred to as a Maryland bridge.

Fractures due to the strain caused by repetitive exercise. They are thought to arise from a combination of MUSCLE FATIGUE and bone failure, and occur in situations where BONE REMODELING predominates over repair. The most common sites of stress fractures are the METATARSUS; FIBULA; TIBIA; and FEMORAL NECK.

Quick Search

DeepDyve research library

Searches Linking to this Article