Track topics on Twitter Track topics that are important to you
The present study aimed to establish a new model to evaluate the compressibility and compactibility of materials simultaneously. Eighteen types of pharmaceutical excipients were studied via direct compaction. The model was established as CR = y + Ae, r ≥ 0.9649 (where CR is the compression ratio and P is the compaction force and y, A, b is constant). The physical meaning of y and b were studied in the model. The results show that y has a strong correlation with the mean yield pressure (Py, r = 0.609, P < 0.01), which is the evaluation parameter of material compressibility. b has a strong correlation with the evaluation parameter of material compactibility, such as the slope of the tensile strength versus compaction force (k, r = 0.780, P < 0.01) and the tensile strength versus porosity (Ryshkewitch-Duckworth equation) (k, r = 0.658, P < 0.01). The results of model experiments (r = 0.767, 0.895, and 0.756), literature, and repeatability verification demonstrated that the main parameters y and b in the established model have good applicability and repeatability. Therefore, the newly established model is reliable for evaluating both the compressibility and the compactibility of powders. The model provides support for further research into powder properties and tablet preparation.
This article was published in the following journal.
Name: International journal of pharmaceutics
Based on dry powder inhaler (DPI) inhalation process, powder properties have a key influence on fluidization and deagglomeration behavior during aerosol generation. The aim of this study was to explor...
Capsule filling is frequently accomplished via the dosator process. Controlling the main quality attributes, i.e., the fill weight and the fill weight variability, requires excellent process understan...
A vast amount of ecological knowledge generated over the past two decades has hinged upon the ability of model selection methods to discriminate among various ecological hypotheses. The last decade ha...
This article is related to research article entitled "Resolution, energy and time dependency on layer scaling in finite element modelling of laser beam powder bed fusion additive manufacturing" . T...
The purpose of this study is to evaluate the safety and effectiveness of the NiTi CAR device in the creation of colorectal anastomosis
This is a randomized crossover trial to evaluate the effects of thoracic compression applied alone or in association with hyperinflation maneuver with the ventilator. In addition, the mobi...
The purpose of this study was to evaluate the therapeutic effect of a functional yogurt powder on menopausal, middle-aged women at high risk of osteoporosis. The functional yogurt powder c...
Investigate how manipulating the time between caffeine ingestion and exercise may alter exercise performance and cognition
The purpose of this study is to evaluate the effects of freeze dried strawberry powder on LDL cholesterol, central and peripheral blood pressure, indices of arterial stiffness, and other l...
A device that delivers medication to the lungs in the form of a dry powder.
Statistical formulations or analyses which, when applied to data and found to fit the data, are then used to verify the assumptions and parameters used in the analysis. Examples of statistical models are the linear model, binomial model, polynomial model, two-parameter model, etc.
Tight coverings for the foot and leg that are worn to aid circulation in the legs and prevent the formation of EDEMA and DEEP VEIN THROMBOSIS. PNEUMATIC COMPRESSION STOCKINGS serve a similar purpose especially for bedridden patients and following surgery.
Method of using a polycrystalline powder and Rietveld refinement (LEAST SQUARES ANALYSIS) of X-RAY DIFFRACTION or NEUTRON DIFFRACTION. It circumvents the difficulties of producing single large crystals.
Theoretical models simulating behavior or activities in nursing, including nursing care, management and economics, theory, assessment, research, and education. Some examples of these models include Orem Self-Care Model, Roy Adaptation Model, and Rogers Life Process Model.