Additive manufacturing technologies for processing zirconia in dental applications.

07:00 EST 1st January 2020 | BioPortfolio

Summary of "Additive manufacturing technologies for processing zirconia in dental applications."

The objective of this narrative review was to summarize the current status and future perspectives of additive manufacturing (AM) technologies with a particular emphasis on manufacturing zirconia-based materials. AM technologies include vat photopolymerization, material jetting, material extrusion, selective laser sintering (SLS), and selective laser melting (SLM) technologies based on either powder bed fusion (PBF) technologies or direct energy deposition, or sheet lamination based on binder jetting technologies.


Journal Details

This article was published in the following journal.

Name: International journal of computerized dentistry
ISSN: 1463-4201
Pages: 27-37


DeepDyve research library

PubMed Articles [12254 Associated PubMed Articles listed on BioPortfolio]

Laser additive nano-manufacturing under ambient conditions.

Additive manufacturing at the macroscale has become a hot topic of research in recent years. It has been used by engineers for rapid prototyping and low-volume production. The development of such tech...

Strength and Adaptation of Stereolithography-Fabricated Zirconia Dental Crowns: An In Vitro Study.

To evaluate the physical and mechanical properties of zirconia ceramic manufactured with stereolithography and to quantitatively analyze the internal and marginal adaptation of the zirconia ceramic de...

Additive Manufacturing for Metal Applications in Orthopaedic Surgery.

Metallic additive manufacturing, a process by which metal structures are created in a layered fashion, is poised to revolutionize orthopaedic implants and instruments. It allows for the design and man...

3D Printing for Electrochemical Energy Applications.

Additive manufacturing (also known as three-dimensional (3D) printing) is being extensively utilized in many areas of electrochemistry to produce electrodes and devices, as this technique allows for f...

Advances in Bioprinting Using Additive Manufacturing.

Since its conception in the 1980's, several advances in the field of additive manufacturing have led to exploration of alternate as well as combination biomaterials. These progresses have directed the...

Clinical Trials [3896 Associated Clinical Trials listed on BioPortfolio]

A Descriptive, Prospective Clinical Study to Evaluate Full Dentures Fabricated by Additive Manufacturing

This investigation is undertaken to evaluate the workflow and concomitant products to create full dentures by using Additive Manufacturing (AM) technology, i.e. Digital Light Processing™ ...

Anterior Zirconia vs. Resin Strip Crowns

This study is comparing the effectiveness of two different dental crown fillings (resin crowns and zirconia crowns) for primary front teeth (incisors). Both dental crown fillings are curre...

Properties and Clinical Performance of Zirconia-Based Dental Ceramics

The objectives of this study are to determine the clinical performance of zirconia-based dental prostheses and their related properties.

Outcome of Immediate Zirconia Implants

The aim is to study bone and soft tissue response to zirconia immediate implants.Volumetric changes will be measured before tooth extraction and after final crow placement.

Zirconia Based Fixed Dental Prostheses

The objective of this prospective clinical study is to investigate the differences in the complication rates between tooth- and implant- supported zirconia based fixed dental prostheses (F...

Medical and Biotech [MESH] Definitions

A chelating agent (CHELATING AGENTS) that sequesters a variety of polyvalent cations. It is used in pharmaceutical manufacturing and as a food additive.

Concept relating to technologies and/or information emanating from research that holds the potential for both benevolent and malevolent applications to humanity and the environment.

A compound used as an x-ray contrast medium that occurs in nature as the mineral barite. It is also used in various manufacturing applications and mixed into heavy concrete to serve as a radiation shield.

Places provided for the processing, fabrication, assembly, and production of a line of products, services, commodities, or merchandise.

A polyhydric alcohol with about half the sweetness of sucrose. Sorbitol occurs naturally and is also produced synthetically from glucose. It was formerly used as a diuretic and may still be used as a laxative and in irrigating solutions for some surgical procedures. It is also used in many manufacturing processes, as a pharmaceutical aid, and in several research applications.

Quick Search
DeepDyve research library

Relevant Topic

Dentistry is the study, management and treatment of diseases and conditions affecting the mouth, jaw, teeth and their supporting tissues (Oxford Medical Dictionary) The work of a dentist ranges from regular patient check-up to orthodontics and surgery....

Searches Linking to this Article