Topics

PubMed Journals Articles About "Influence Different Cordless Light Emitting Diode Units Battery" RSS

22:58 EST 17th January 2020 | BioPortfolio

Influence Different Cordless Light Emitting Diode Units Battery PubMed articles on BioPortfolio. Our PubMed references draw on over 21 million records from the medical literature. Here you can see the latest Influence Different Cordless Light Emitting Diode Units Battery articles that have been published worldwide.

More Information about "Influence Different Cordless Light Emitting Diode Units Battery" on BioPortfolio

We have published hundreds of Influence Different Cordless Light Emitting Diode Units Battery news stories on BioPortfolio along with dozens of Influence Different Cordless Light Emitting Diode Units Battery Clinical Trials and PubMed Articles about Influence Different Cordless Light Emitting Diode Units Battery for you to read. In addition to the medical data, news and clinical trials, BioPortfolio also has a large collection of Influence Different Cordless Light Emitting Diode Units Battery Companies in our database. You can also find out about relevant Influence Different Cordless Light Emitting Diode Units Battery Drugs and Medications on this site too.

Showing "Influence Different Cordless Light emitting diode Units Battery" PubMed Articles 1–25 of 14,000+

Influence of Different Cordless Light-emitting-diode Units and Battery Levels on Chemical, Mechanical, and Physical Properties of Composite Resin.

The aim of this study was to evaluate the influence of different light-emitting diode (LED) curing units and battery levels on the chemical, mechanical, and physical properties of composite resins. The irradiance for each cycle from full to completely discharged battery level was evaluated, for five different new cordless LED units: Optilight Color (Gnatus), Bluephase (Ivoclar), Valo (Ultradent), Radii Plus (SDI), and Radii Xpert (SDI). After the irradiance evaluation, composite resin specimens were prepare...


Safety of light emitting diode-red light on human skin: two randomized controlled trials.

Therapeutic applications of light emitting diode-red light (LED-RL) are expanding, yet data on its clinical effects are lacking.

Diagnostic Ability of Magnifying Blue Light Imaging with a Light Emitting Diode Light Source for Early Gastric Cancer: A Prospective Comparative Study.

An innovative endoscopic system using 4-color light-emitting diodes (LED) was released between 2016 and 2017 in locations that had not approved laser endoscopes for use, including the United States and Europe.


Degree of conversion and microhardness of bulk-fill dental composites polymerized by LED and QTH light curing units.

The degree of monomer conversion is crucial in determining the mechanical and clinical performance of dental resin composites. This study investigated the polymerization adequacy of two bulk-fill resin composites polymerized by Quartz-Tungsten-Halogen (QTH) and Light Emitting Diode (LED) light curing units at different depths.

Color conversion efficiency enhancement of colloidal quantum dot through its linkage with synthesized metal nanoparticle on a blue light-emitting diode.

Four surface-modified and, hence, positively charged metal nanoparticles (NPs) of different localized surface plasmon (LSP) resonance wavelengths are synthesized for linking with negatively charged, red-emitting colloidal CdZnSeS/ZnS quantum dots (QDs) on the top surface of a blue-emitting InGaN/GaN quantum well (QW) light-emitting diode (LED) through electro-static force. The metal NP-QD linkage leads to a short distance between them for producing their strong surface plasmon (SP) coupling, such that QD ab...

Enhanced Triplet-Triplet Annihilation of Blue Fluorescent Organic Light Emitting Diode by Generating Excitons in Trapped Charge Free Regions.

Three new anthracene cored molecules, 3,3'-(5-(10-(naphthalen-1-yl)anthracen-9-yl)-1,3-phenylene)dipyridine (AP3Py-Na), 3,3'-(5-(10-(naphthalen-2-yl)anthracen-9-yl)-1,3-phenylene)dipyridine (AP3Py-2Na), and 9,10-bis(3,5-di(pyridin-3-yl)phenyl)anthracene (ADP3Py), were synthesized to use as an efficiency enhancement layer (EEL) in blue fluorescent organic light emitting diodes (OLEDs). Insertion of a very thin EEL (3 nm) between the deep blue emitting layer (EML) and the electron transport layer (ETL) enhanc...

Influence of Multiple Peak Light-emitting-diode Curing Unit Beam Homogenization Tips on Microhardness of Resin Composites.

This study evaluated the effect of light curing unit (LCU) guide type (regular or homogenizing) on top and bottom microhardness of conventional and bulk-fill resin-based composites (RBCs). A polywave light-emitting-diode (LED) LCU (Bluephase Style, Ivoclar Vivadent AG) was used with two different light guides: a regular tip (RT, 935 mW/cm emittance) and a homogenizer tip (HT, 851 mW/cm emittance). Two conventional RBCs (Herculite Ultra [HER], Kerr Corp; Tetric EvoCeram [TEC], Ivoclar Vivadent AG) and two bu...

Influence of the Silver Nanocrystal Shape on the Luminous Efficiency of Blue-Emitting Polymer Light-Emitting Diodes.

Truncated silver nanodecahedrons (TAgNDs) and truncated silver nanoplates (TAgNPs) fabricated via chemical reduction and photochemical methods were added to poly[3,4-ethylenedioxythiophene]:poly[styrenesulfonate] (PEDOT:PSS) as a dopant to promote the luminous efficiency of blue-emitting polymer light-emitting diodes (PLEDs). The differences in shape between TAgNDs and TAgNPs result in better dispersion of TAgNDs in PEDOT:PSS. Therefore, at an optimal doping concentration (the distributed density in the lig...

Light emitting diode (LED) based fluorescence microscopy for tuberculosis detection: a review.

Since time immemorial, tuberculosis (TB) has intimidated the human race owing to its severity. Its socio-economic burden has led to it being a major cause of concern. It is one of the world's major causes of death from a single agent. Since most of the middle- and low-income countries are burdened with TB, sputum smear examination using conventional light microscopy is often the only resort for diagnosing TB. However, fluorescence microscopy is used as standard in most high-income countries, owing to its in...

Evaluation of Rh-Hemolytic Disease in Neonates and Management with Early Intensive Phototherapy in the Neonatal Intensive Care Unit.

In neonates with Rh-hemolytic disease, light emitting diode (LED) phototherapy allows delivery of high spectral irradiance (SI). A linear correlation exists between SI and efficacy of phototherapy with no saturation point. There is scant data on evaluation and early phototherapy using LED units in Rh-hemolytic disease.

Photoactivated disinfection in periodontal treatment- a randomized controlled clinical split-mouth trial.

Photoactivated disinfection (PAD) could support the periodontal treatment outcome. The effect of the light emitting diode (LED) as an innovative light source in PAD is under discussion. The aim of this study was to evaluate the clinical and microbiological effect of adjunctive PAD in the treatment of periodontitis with a red LED as light source.

Adoption and consequences of new light-fishing technology (LEDs) on Lake Tanganyika, East Africa.

Maintaining sustainable fisheries requires understanding the influence of technological advances on catch efficiency, as technological creep can ultimately contribute to increased efficiency. Fisheries using light sources for attraction could be widely impacted by the shift to light emitting diode (LED) light systems. We studied the transition from kerosene lanterns to LED lamps in Lake Tanganyika, East Africa, examining factors that led to adoption as well as the impact of the new light sources on fish cat...

The Effects of Photobiomodulation on MC3T3-E1 Cells via 630 nm and 810 nm Light-Emitting Diode.

BACKGROUND Photobiomodulation (PBM) has been explored as a promising therapeutic strategy to regulate bone cell growth; however, the effects of PBM on osteoblast cell lines remains poorly understood. In addition, as a light source of PBM, the light uniformity of light-emitting diode (LED) devices has not been given enough attention. MATERIAL AND METHODS Here, we sought to investigate the effects of PBM on MC3T3-E1 cells via 630 nm and 810 nm light from a newly designed LED with high uniformity of light. Cel...

Composition-tailored ZnMgO nanoparticles for electron transport layers of highly efficient and bright InP-based quantum dot light emitting diodes.

Tailored-ZnMgO layers result in green-emitting InP based quantum dot light emitting diodes (QLEDs) with a maximum luminance of 13 900 cd m-2 and an external quantum efficiency (EQE) of 13.6%. This is the first report of green-emitting InP based QLEDs that exceed an EQE of 10% and a luminance of 13 000 cd m-2.

Small but powerful: Light-emitting diodes for inactivation of Aspergillus species in real water matrices.

This study addressed the effectiveness of light emitting diodes to achieve inactivation of three different Aspergillus species (Aspergillus fumigatus, Aspergillus niger and Aspergillus terreus) in a real water matrix. Three single small ultraviolet-C diodes emitting light at two different wavelengths were tested: 255 nm that is similar to the wavelength emitted by low pressure mercury lamps and 265 nm that is closer to the maximum absorbance wavelength of DNA. The ultraviolet-C diodes emitting light at ...

The accuracy of artificial and natural light measurements by actigraphs.

Actigraphs are the reference standard for measuring light exposure in human non-laboratory experiments due to their portability and long battery lives. However, actigraphs typically have a limited illuminance operating range not representative of real-world conditions, and for many actigraphs, the accuracy of their light measurement has not been verified independently. We assessed the illuminances recorded by Activinsights GENEActiv Original and Philips Actiwatch 2 actigraphs in comparison to a calibrated, ...

Multi-Resonance Induced Thermally Activated Delayed Fluorophores for Narrowband Green OLEDs.

High-color purity emissions with small a full-width at half-maximum (FWHM) are ongoing pursuit for high-resolution displays. Though the flourishment of narrow-band emissive materials with multi-resonance induced thermally activated delayed fluorescence (MR-TADF) in blue region, such materials haven't validated their potential in other color regions. By amplifying the influence of skeleton and peripheral units, a series of highly efficient green-emitting MR-TADF materials are firstly reported here. It is fou...

Computational modeling of ultraviolet light-emitting diode (UV-LED) reactor for water treatment.

The ultraviolet light emitting diode (UV-LED) has recently emerged as a new UV source. It offers design flexibility due to its small size and ability to alter its radiation profile. In view of the variety of design possibilities for a UV-LED reactor, a computational model could be of great value for simulating the reactor and providing insight into its performance. Given the UV-LED's ability to emit various radiation wavelengths and because it is a directional UV source, the challenges of simulation for UV-...

Antimicrobial properties of acrylic resins doped with Undaria pinnatifida exposed to light-emitting diode: In silico and in vitro assessments on multispecies biofilm-producing microbiota.

This study sought to evaluates the efficiency of anti-microbial activity of acrylic resins doped with different concentrations of Undaria pinnatifida after activation with light-emitting diode (LED) at producing photodynamic damage to multispecies biofilm-producing microbiome MATERIAL AND METHODS: In this study, bioinformatics tools and computer simulation molecular modeling were used to evaluate the capacity of ferredoxin (FDX), an electron acceptor in metabolic pathways of U. pinnatifida, which can discha...

A comparison of dissolved organic matter transformation in low pressure ultraviolet (LPUV) and ultraviolet light-emitting diode (UV-LED)/chlorine processes.

This study compared the degradation of dissolved organic matter (DOM) by UV/chlorine advanced oxidation processes (AOPs) with emerging ultraviolet light-emitting diode (UV-LED, 275 nm) and traditional low pressure UV (LPUV, 254 nm) as UV sources. Excitation emission matrix-parallel factor (EEM-PARAFAC) analysis and two-dimensional (2D) correlation gel permeation chromatograph were applied to explore the evolutions of DOM during oxidation processes. The degradation behaviors of DOM indicated by UV absorb...

Photodynamic antimicrobial chemotherapy with the photosensitizer TONS504 eradicates Acanthamoeba.

Microbial keratitis is a potential cause of corneal blindness. We investigated the amoebicidal efficacy of photodynamic antimicrobial chemotherapy with a light-emitting diode as the light source and the cationic chlorin derivative TONS504 as the photosensitizer for the elimination ofAcanthamoeba, a causative organism of corneal infection and blindness. Acanthamoeba keratitis remains a challenge to treat because of limited available treatments.

White light-emitting devices based on ZnCdS/ZnS and perovskite nanocrystal heterojunction.

Perovskite white light-emitting devices (WLEDs) without intercalation layers have not been achieved due to the ion exchange. Although the intercalation layers prevent ion exchange between perovskite nanocrystals (NCs), it also creates a new problem of charge imbalance and the structure becomes more complex. In this study, blue emitting ZnCdS/ZnS NCs with high quantum yield and stability are introduced to work with the yellow emission from CsPb(Br/I)3 perovskite NCs for WLEDs. The WLEDs are constituted of IT...

Hybrid light emitting diodes based on stable, high brightness all-inorganic CsPbI perovskite nanocrystals and InGaN.

Despite important advances in the synthesis of inorganic perovskite nanocrystals (NCs), the long-term instability and degradation of their quantum yield (QY) over time need to be addressed to enable the further development and exploitation of these nanomaterials. Here we report stable CsPbI3 perovskite NCs and their use in hybrid light emitting diodes (LEDs), which combine in one system the NCs and a blue GaN-based LED. Nanocrystals with improved morphological and optical properties are obtained by optimizi...

Realisation and assessment of a low-cost LED device for contact lens disinfection by visible violet light.

This study presents a device for efficient, low-cost and eye-friendly overnight disinfection of contact lenses by visible violet light as an alternative to disinfection with biocide-containing solutions. Bacterial solutions with one Pseudomonas and one Staphylococcus strain each were irradiated for up to 8 h in commercial transparent contact lens cases by the presented light-emitting diode (LED) device. Samples were taken at different intervals and distributed on agar plates. The surviving bacteria were det...

Promising Hybrid Graphene-Silver Nanowire Composite Electrode for Flexible Organic Light-Emitting Diodes.

Thanks to its high transparency, high carrier mobility, and thermal conductivity, graphene is often used as transparent conductive electrode (TCE) in optoelectronic devices. However, the low carrier concentration and high resistance caused by vacancy defects, grain boundaries, and superposed folds in typical graphene films limit its application. In this study, we propose a method to increase both the conductivity and carrier concentration in single-layer graphene (SLG) by blending it with silver nanowires (...


Quick Search