Advertisement

Topics

PubMed Journals Articles About "Ceramic Crowns Tooth Wear" RSS

06:40 EDT 23rd October 2018 | BioPortfolio

Ceramic Crowns Tooth Wear PubMed articles on BioPortfolio. Our PubMed references draw on over 21 million records from the medical literature. Here you can see the latest Ceramic Crowns Tooth Wear articles that have been published worldwide.

More Information about "Ceramic Crowns Tooth Wear" on BioPortfolio

We have published hundreds of Ceramic Crowns Tooth Wear news stories on BioPortfolio along with dozens of Ceramic Crowns Tooth Wear Clinical Trials and PubMed Articles about Ceramic Crowns Tooth Wear for you to read. In addition to the medical data, news and clinical trials, BioPortfolio also has a large collection of Ceramic Crowns Tooth Wear Companies in our database. You can also find out about relevant Ceramic Crowns Tooth Wear Drugs and Medications on this site too.

Showing "ceramic crowns Tooth Wear" PubMed Articles 1–25 of 881

Fracture resistance of three different all-ceramic crowns: In vitro study.

To evaluate the fracture resistance and failure mode of three different all-ceramic crowns; CEREC Bloc, IPS e.Max Press and Cercon in a simulated clinical situation.


Marginal Fit of All-Ceramic Crowns Before and After Cementation: An In Vitro Study.

The marginal integrity of all-ceramic crowns for anterior and posterior teeth were evaluated. A total of 60 ceramic crowns (In-Ceram Alumina, IPS e.max Press, and Lava) were fabricated for the epoxy resin maxillary first central incisor and first molar and divided into three groups (n = 20). The crowns were measured at the facial, lingual, mesial, and distal finish lines (52 points) before and after cementation using scanning electron microscopy. The results were analyzed using one-way analysis of variance,...

Effect of Simulated Mastication on the Surface Roughness and Wear of Machinable Ceramics and Opposing Dental Enamel.

Computer aided design-computer aided machining (CAD-CAM) ceramic crowns are replacing ceramo-metal ones due to newly developed mechanical properties and esthetics. To obtain knowledge about their interactions due to polishing and occlusal contacts with the opposing dental enamel specimen, including surface roughness and wear, the three-body wear simulation was investigated.


Impact of tooth wear on masticatory performance.

Masticatory performance is influenced by a number of variables such as age, gender, bite force, and occlusal units. Tooth wear may also play a role due to changes in occlusal area and in vertical dimension of occlusion. The aim of this study was to evaluate the effect of tooth wear on masticatory performance, using a communition test.

In Vitro Fatigue and Fracture Testing of Implant-Supported Anterior Ceramic Crowns.

To evaluate the fatigue and fracture resistance of anterior implant-supported and tooth-supported crowns made of different monolithic ceramics.

Erosive Tooth Wear and Dietary Patterns: A Clinical Study.

Evidence exists which suggests that a vegetarian diet is a predisposing factor to erosive tooth wear. The aim of this study was to assess the influence of dietary pattern (vegetarian, lacto-ovo vegetarian and omnivore) on erosive tooth wear.

Influence of microscale expansion and contraction caused by thermal and mechanical fatigue on retentive strength of CAD/CAM-generated resin-based composite crowns.

CAD/CAM-generated resin-based composite crowns have been proposed as an inexpensive alternative to conventional crowns. However, concerns have been raised about crown loosening in clinical use. Therefore, the present in vitro study aimed to evaluate the influence of thermal and mechanical cycling (TC and MC) on retentive strength of CAD/CAM resin-based crowns in relation to microscale expansion and contraction caused by fatigue. Eighty standardized dies were produced using a resin-based composite material. ...

Reasoning of adhesive system choice for treatment of patients with increased tooth wear.

Introduction: Perceiving the high prevalence of direct composite restoration technique usage for the rehabilitation of patients with increased tooth wear, as well as during the sanitation of oral cavity before indirect methods of rehabilitation, there is a necessity in more detailed reasoning of adhesive system application for treatment of dentition with increased tooth wear. The aim: The purpose of our work was to study the microstructure and chemical compound of hard tissues of teeth on background of incr...

Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics.

Dental composite and ceramic restorative materials are designed to closely mimic the aesthetics and function of natural tooth tissue, and their longevity in the oral environment depends to a large degree on their fatigue and wear properties. The purpose of this review is to highlight some recent advances in our understanding of fatigue and wear mechanisms, and how they contribute to restoration failures in the complex oral environment. Overall, fatigue and wear processes are found to be closely related, wit...

Wear at the taper-trunnion junction of contemporary ceramic-on-ceramic hips shown in a multistation hip simulator.

Ceramic-on-ceramic (CoC) total hip replacements (THR) have a substantially lower wear rate than metal-on-polyethylene (MoP) hips, as shown by hip simulator testing. However, the revision rates of CoC and MoP hips are comparable. To try and explain this discrepancy the wear, at both the bearing surfaces and taper-trunnion interface of 36 mm BIOLOXdelta CoC THRs, mounted on 12/14 titanium (Ti6Al4V) trunnions was investigated using a hip simulator (n = 3) and a dynamically loaded CoC sample in a separate test ...

Marginal Adaptation of CAD/CAM All-Ceramic Crowns Made by Different Impression Methods: A Literature Review.

All-ceramic crowns for teeth are widely used for restoring teeth. Stone casts have been made from conventional impression methods; however, newer techniques have made this process easier and faster for both the patient and the practitioner. Laboratory CAD/CAM technology mainly involves scanning the die stone, while other systems permit impression or intraoral scanning; however, one major concern remaining is the marginal fit of the restorations made using different methods for recording the prepared teeth. ...

Ultrathin CAD-CAM Ceramic Occlusal Veneers and Anterior Bilaminar Veneers for the Treatment of Moderate Dental Biocorrosion: A 1.5-Year Follow-Up.

Dental biocorrosion can produce a devastating impact on oral health. The restorative phase of the treatment should not cause additional damage of the remaining sound tooth structure. Ultrathin occlusal veneers are a conservative alternative to traditional onlays and complete crowns for the treatment of severe biocorrosive lesions. This strategy is explained in the present case report through a full-mouth rehabilitation of a patient with moderate biocorrosion. Maxillary anterior teeth were restored using the...

Genome-Wide Association Study of Erosive Tooth Wear in a Finnish Cohort.

Erosive tooth wear is defined as irreversible loss of dental tissues due to intrinsic or extrinsic acids, exacerbated by mechanical forces. Recent studies have suggested a higher prevalence of erosive tooth wear in males, as well as a genetic contribution to susceptibility to erosive tooth wear. Our aim was to examine erosive tooth wear by performing a genome-wide association study (GWAS) in a sample of the Northern Finland Birth Cohort 1966 (n = 1,962). Erosive tooth wear was assessed clinically using the ...

Prevalence, severity and explanatory factors of tooth wear in Arab populations.

The aim of this study was to assess the prevalence and severity of tooth wear and related risk indicators in six Arab countries.

Replicating a discolored tooth preparation: A technique for effective laboratory communication.

Fabricating a ceramic restoration for a discolored anterior tooth presents a clinical challenge. The dental technician is often hampered by being unaware of the shade of the discolored tooth preparation, which influences the color of the overlying ceramic restoration. A definitive cast that replicates the shade of the prepared tooth helps the ceramist to fabricate a restoration that masks the discoloration appropriately and still achieves the desired optical properties. This report demonstrates the use of a...

The Effect of Adhesive Failure and Defects on the Stress Distribution in All-ceramic Crowns.

To explore the effect of adhesive failure and defects between the crown and cement on the stress distribution within all-ceramic crowns and the corresponding risk of failure.

Oral health-related impact profile in full-mouth restored patients with two different tooth-colored restoration materials.

To analyze the change of oral health impact profile (OHIP) in patients with full-mouth rehabilitations due to moderate/severe tooth wear dependent on different restorative materials (ceramic/experimental CAD/CAM composite).

Monitoring the progression of erosive tooth wear (ETW) using BEWE index in casts and their 3D images: A retrospective longitudinal study.

To determine if the Basic erosive tooth wear index (BEWE index) is able to assess and monitor ETW changes in two consecutive cast models, and detect methodological differences when using the corresponding 3D image replicas.

Assessment of Antagonist Enamel Wear and Clinical Performance of Full-Contour Monolithic Zirconia Crowns: One-Year Results of a Prospective Study.

To assess the clinical performance and survival of full-contour monolithic zirconia (MZ) crowns and enamel wear produced over a 1-year period.

Tooth wear during orthodontic treatment with fixed appliances: a systematic review.

Tooth wear, additional to the physiologic alterations of the dentition, may occur during orthodontic treatment. The objective of the present review was to investigate systematically the literature relevant to its progression in patients having undergone comprehensive orthodontic treatment.

Using Ceramic-on-Ceramic Bearings in Total Hip Arthroplasty Necessitating 44- or 46-mm Metal Shells.

Ceramic-on-ceramic articulation shows the lowest wear, with a low incidence of osteolysis. A small cup limits options regarding liner thickness and femoral implant size. The purpose of this study was to evaluate the safety of a 4-mm-thick ceramic liner and the outcomes of cementless total hip arthroplasty using a 44- or 46-mm metal shell and a ceramic-on-ceramic bearing at mid- to long-term follow-up. Between May 2003 and June 2008, 80 patients (88 hips) who had hip osteoarthritis and a hypoplastic acetabul...

Comparative study of the wear of the pair human teeth/Vita Enamic® vs commonly used dental ceramics through chewing simulation.

Ceramic based prosthetic materials have been used in dental restorations due to their excellent aesthetic and biocompatibility. However, due to concerns related to their mechanical properties and abrasive action against natural teeth, a proper selection of these materials is crucial to preserve the occlusal interactions and prevent abnormal dental wear. The aim of this work is to compare the wear performance of Vita Enamic®, a polymer infiltrated ceramic (PIC), with that of other three commercial ceramic b...

Impact of dentifrice abrasivity and remineralization time on erosive tooth wear in vitro.

To investigate the in vitro effects of simulated dentifrice slurry abrasivity (L-low, M-medium and H-high) and remineralization time (0, 30, 60 and 120 minutes) on erosive tooth wear.

Erosive tooth wear: knowledge among young adults and their preferred information sources.

The aim of this study was to learn more about levels of knowledge relating to erosive tooth wear and about the most desirable way of disseminating dental information among young adults.

Toothbrush Wear in Relation to Tooth Brushing Effectiveness.

To investigate to what extent the degree of toothbrush wear of 3-month-old manual toothbrushes influence plaque scores.


Advertisement
Quick Search
Advertisement
Advertisement