DXA Study of Precision and Reliability

2018-08-12 17:25:10 | BioPortfolio


The purpose of the study is to assess precision of the GE Lunar iDXA, Hologic Horizon W DXA scanner, and the Stratec peripheral quantitative computed tomography (pQCT) scanner.

Aim 1: To assess standard deviation (SD) and coefficient of variation (CV) of testing bone mineral, bone geometry, and soft tissues in inanimate objects and adults. Tests on adults will be structured to assess:

1. Within- and between-day variability of testing

2. Within- and between-technician variability of testing

3. Variability due to positioning and post-scan processing

4. Variability due to different DXA scanning equipment

Aim 2: To assess the least significant change (LSC) for testing bone mineral and soft tissues in adults.

Aim 3: To assess strengths and limitations of DXA and pQCT testing, including sensitivity to movement, rate of re-rescanning, etc. which are crucial components for demonstrating feasibility in grant applications.

Aim 4: To construct a database of DXA and pQCT test results and quality control procedures, showing our laboratory's quality control level.


Osteoporosis and obesity are highly prevalent and disabling chronic diseases. Osteoporosis is a disease of low bone mass, which predisposes people to bone fragility and increased risk of bone fractures. Obesity is a disease characterized by excess body fat levels, which predisposes people to diabetes, heart disease, stroke, hypertension, cancer, sleep apnea, osteoarthritis, and gallbladder disease.

An essential component to research on the prevention and treatment of osteoporosis and obesity is a valid method for monitoring body fat levels and bone mineral density. Dual energy X-ray absorptiometry (DXA) is a method for analyzing bone mineral density and body composition, particularly bone mineral content, fat mass and lean mass in children and adults. DXA scanners use an X-ray tube to produce radiation, which is then filtered into low- and high-energy beams. These beams of radiation are emitted from beneath a table that the supine human body is lying on. The arm, which passes above the person, detects the attenuation of the radiation for each pixel the body occupies. Based on known attenuation levels of different human tissues, the imaging software provides information on the composition of each pixel of the body. These pixels are then summed to provide information on: total body bone mineral content, total bone mineral density, fat mass, and lean mass. The DXA can also assess regional body composition (e.g. trunk fat), which is of importance in evaluating health effects of body fatness patterns. Using standard protocols, bone mineral content and density can be assessed in areas of the body indicating high risk of fractures (e.g. hip and lumbar spine) or areas that are likely to be responsive to dietary or physical activity manipulations (e.g. lumbar spine and radius).

Peripheral quantitative computed tomography (pQCT) is a 3-dimensional imaging technique that goes beyond the 2-dimensional imaging of DXA to assess both true volumetric bone density and bone geometry, the two key components of bone strength. Additionally, it can divide bone into its component parts, i.e. separately assessing bone density and bone geometry of cortical and trabecular bone. As such, the measurements obtained from pQCT provides a more complete picture of what may be occurring within bone tissue that contributes to either bone gain or bone loss, depending on the population and question of interest. pQCT assesses parameters of bone strength at the radius (forearm) and tibia (lower leg).

A vital component of any clinical and research program is precision testing, which assesses the reproducibility of DXA and pQCT measurements within an individual technician and/or between multiple technicians. This study was designed to address our facility's needs and ethical requirement to complete precision testing. This precision testing is a necessary component of verifying the feasibility and validity of the method, as well as cross-calibrating DXA scanners in our multi-site studies. We are completing this testing with the two DXA scanners, the GE Lunar iDXA and the Hologic Horizon W DXA, as well as with the Stratec XCT 3000 pQCT.

A vital component of any clinical and research program is precision testing, which assesses the reproducibility of DXA measurements within an individual technician and/or between multiple technicians. As alluded to above, the validity of bone and soft tissue measurements by DXA and pQCT is related to the skill of the technician in: 1) properly positioning the person before scanning and 2) properly analyzing the scan images afterward. Both of these components are subjective, requiring experience and feedback to improve technique.

From an ethical standpoint, a level of technician competency is important in ensuring that both research volunteers and the technician are not exposed to radiation without the benefit of acceptable scan results. From a clinical and research standpoint, understanding the inherent variability in testing is an important component in planning and executing research studies having bone or body fat outcomes. As described the Conference of Radiation Control Program Directors, Inc. (CRCPD), and as established by the International Society of Bone Densitometry (ISCD), measurement of precision is a key component for assessing:

1. The smallest change (least significant change, LSC) in bone density that is biologically significant

2. The time interval between measurements necessary to detect changes.

Precision testing requires that multiple scans be completed on individuals representative of the primary target population of interest, sometimes within a fairly short period of time. This exposure of additional radiation to a select group of individuals has created controversy about whether precision testing is necessary and ethical. The CRCPD and ISCD has fully supported precision testing, and recommended that it be a routine practice in all DXA sites. The CRCPD states that, "Some states without understanding the need for precision testing have prohibited the measurement despite low radiation doses and limited numbers of repeat densitometry determinations. Their major concern, of course, is the apparent unnecessary radiation to a few, select patients. To address the benefit versus risk issue, those exposed to the additional, small amount of radiation (equal to approximately an additional 6-12 hours of background radiation) are providing a benefit to themselves and all others by validating the results of bone mineral density (BMD) exams for that facility. Without precision testing, the BMD study is of no value resulting in thousands of patients being exposed to unnecessary radiation."

Study Design


Bone and Bones


DXA and pQCT precision testing


Women's Health and Exercise Laboratories, The Pennsylvania State University
University Park
United States




Penn State University

Results (where available)

View Results


Published on BioPortfolio: 2018-08-12T17:25:10-0400

Clinical Trials [1710 Associated Clinical Trials listed on BioPortfolio]

Bone Microarchitecture in Young Cystic Fibrosis Patients

Patients with cystic fibrosis are at risk of developing low bone mineral density (BMD) potentially leading to pathological fractures at adult age. Recent data from our center and others ha...

Bone Architectural Parameters in Postmenopausal Women Affected With Primary Hyperparathyroidism

Bone lesions are frequent in primary hyperparathyroidism (PHPT). Conventional measurement by Dual-Energy X-ray Absorptiometry does not provide enough information about the bone impact of e...

Bone Microarchitectural Database Constitution From HR-pQCT Device in Clinical Situation Potentially Associated With Bone Loss

Bone fracture occurrence is associated with an increasing of morbidity and mortality. Some factors of fracture occurrence have been highlighted. For example, some diseases or therapy are k...

Age Influence on Cortical Bone Measured by Ultrasound

The study of this study is to evaluate the age influence on cortical bone strength properties by two methods:HR-pQCT (HighResolution-peripheral quantitativeComputedTomography) and ultrasou...

Progression of Bone Erosions in Rheumatoid Arthritis Assessed by HR-pQCT and Conventional X-ray

Today, regular X-ray examination is not sufficiently sensitive for detecting progression of bone destruction in rheumatoid arthritis, but a new type of high-resolution CT scanner, the High...

PubMed Articles [8954 Associated PubMed Articles listed on BioPortfolio]

Reliability of annual changes and monitoring time intervals for bone strength, size, density and micro-architectural development at the distal radius and tibia in children: A 1-year HR-pQCT follow-up.

High-resolution peripheral quantitative computed tomography (HR-pQCT) imaging, together with computational finite element analysis (FEA), offers an attractive, non-invasive tool to quantify bone stren...

How many bones? Every bone in my body.

Textbooks frequently report that there are 206 human bones, or 200 bones and six auditory ossicles. The human bone counts in history and within adulthood were reviewed. Tallies of 197 to 307 bones hav...

Correlation between vertebral bone microstructure and estimated strength in elderly women: An ex-vivo HR-pQCT study of cadaveric spine.

A vertebral fracture is the most common complication of osteoporosis, and various factors are involved in its occurrence. The purpose of this study was to investigate the role of trabecular and cortic...

Assessing bone impairment in ankylosing spondylitis (AS) using the trabecular bone score (TBS) and high-resolution peripheral quantitative computed tomography (HR-pQCT).

To compare bone quality using the trabecular bone score (TBS) and bone microarchitecture in the distal tibia using high-resolution peripheral quantitative computed tomography (HR-pQCT) in ankylosing s...

Correlation Between Cone-Beam Computed Tomography and High-Resolution Peripheral Computed Tomography for Assessment of Wrist Bone Microstructure.

High-resolution peripheral quantitative computed tomography (HR-pQCT) is considered as the best technique to measure bone microarchitecture in vivo. However, a breakthrough for medical applications is...

Medical and Biotech [MESH] Definitions


The detection of genetic variability (e.g., PHARMACOGENOMIC VARIANTS) relevant to PHARMACOGENETICS and PRECISION MEDICINE. The purpose of such genetic testing is to help determine the most effective treatment options and their optimum dosages with least potential risks for DRUG-RELATED SIDE EFFECTS AND ADVERSE REACTIONS.

The facial skeleton, consisting of bones situated between the cranial base and the mandibular region. While some consider the facial bones to comprise the hyoid (HYOID BONE), palatine (HARD PALATE), and zygomatic (ZYGOMA) bones, MANDIBLE, and MAXILLA, others include also the lacrimal and nasal bones, inferior nasal concha, and vomer but exclude the hyoid bone. (Jablonski, Dictionary of Dentistry, 1992, p113)

The growth and development of bones from fetus to adult. It includes two principal mechanisms of bone growth: growth in length of long bones at the epiphyseal cartilages and growth in thickness by depositing new bone (OSTEOGENESIS) with the actions of OSTEOBLASTS and OSTEOCLASTS.

Steel wires, often threaded through the skin, soft tissues, and bone, used to fix broken bones. Kirschner wires or apparatus also includes the application of traction to the healing bones through the wires.

More From BioPortfolio on "DXA Study of Precision and Reliability"

Quick Search


Relevant Topics

Osteoporosis is a disease in which the bones become extremely porous, are subject to fracture, and heal slowly, occurring especially in women following menopause and often leading to curvature of the spine from vertebral collapse. Follow and track&n...

Women's Health
Women's Health - key topics include breast cancer, pregnancy, menopause, stroke Follow and track Women's Health News on BioPortfolio: Women's Health News RSS Women'...

Obesity is the condition in which excess fat has accumulated in the body (mostly in subcutaneous tissues). clinical obesity is considered to be present when a person has a BMI of over 30 (Oxford Dictionary of Medicine). It is becoming increasing common i...

Searches Linking to this Trial