Advertisement

Topics

Microfabrication: conformal printing of electrically small antennas on three-dimensional surfaces (adv. Mater. 11/2011).

06:00 EDT 15th March 2011 | BioPortfolio

Summary of "Microfabrication: conformal printing of electrically small antennas on three-dimensional surfaces (adv. Mater. 11/2011)."

No Summary Available

Affiliation

Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA.

Journal Details

This article was published in the following journal.

Name: Advanced materials (Deerfield Beach, Fla.)
ISSN: 1521-4095
Pages: 1304

Links

DeepDyve research library

PubMed Articles [10803 Associated PubMed Articles listed on BioPortfolio]

Advances in 3-Dimensional Printing in Otolaryngology: A Review.

Three-dimensional (3-D) printing is an exponentially growing technology that enables the use of a patient's image data to create patient-specific models, devices, and implants. Three-dimensional print...

Superintegrability of d-Dimensional Conformal Blocks.

We observe that conformal blocks of scalar four-point functions in a d-dimensional conformal field theory can be mapped to eigenfunctions of a two-particle hyperbolic Calogero-Sutherland Hamiltonian. ...

A New Classification of Three-Dimensional Printing Technologies: Systematic Review of Three-Dimensional Printing for Patient-Specific Craniomaxillofacial Surgery.

Three-dimensional printing technology has been advancing in surgical applications. This systematic review examines its patient-specific applications in craniomaxillofacial surgery.

Patient-Specific Augmentation Rhinoplasty Using a Three-Dimensional Simulation Program and Three-Dimensional Printing.

The convergence of three-dimensional (3D) simulation, tissue engineering, and 3D printing technology is creating a paradigm shift in plastic surgery. In augmentation rhinoplasty, determining the ideal...

Three-Dimensional Printing of a Transconjunctival Vitrectomy Trocar-Cannula System.

The aim of this paper was to study the feasibility of manufacturing a customizable trocar-cannula system for vitreoretinal surgery utilizing commercially available three-dimensional (3D) printing tech...

Clinical Trials [2811 Associated Clinical Trials listed on BioPortfolio]

Positron Emission Tomography and Computed Tomography in Planning Treatment for Patients Undergoing 3-Dimensional Conformal Radiation Therapy for Non-Small Cell Lung Cancer That Cannot Be Removed by Surgery

RATIONALE: Diagnostic procedures, such as positron emission tomography and computed tomography, may help learn the extent of disease and allow doctors to plan 3-dimensional conformal radia...

High-Dose 3-Dimensional Conformal Radiation Therapy in Treating Patients With Inoperable Stage I, Stage II, or Stage IIIA Non-Small Cell Lung Cancer

RATIONALE: Using computer systems that create a 3-dimensional picture of the tumor to plan treatment may enable doctors to provide more effective radiation therapy that will cause less dam...

Three-Dimensional Printing of Patient-Specific Titanium Plates in Jaw Surgery: A Pilot Study

Medical titanium plates are routinely used in fixing mobilized bone segments in jaw surgeries. Generally these plates are commercialized with standard construction specifications. Thus the...

3-Dimensional Conformal Radiation Therapy or Internal Radiation Therapy After Breast-Conserving Surgery in Treating Women With Stage I or Stage II Breast Cancer

RATIONALE: Specialized radiation therapy, such as 3-dimensional conformal radiation therapy, that delivers a high dose of radiation directly to the tumor may kill more tumor cells and caus...

3-Dimensional Conformal Radiation Therapy In Treating Women With Stage I or Stage II Breast Cancer Previously Treated With Lumpectomy and Axillary Node Dissection

RATIONALE: 3-dimensional conformal radiation therapy delivers a high dose of radiation directly to the tumor and may kill more tumor cells and cause less damage to normal tissue. PURPOSE:...

Medical and Biotech [MESH] Definitions

Process for making, building or constructing a physical object from a three-dimensional digital model by laying down many successive thin layers of building material.

CONFORMAL RADIOTHERAPY that combines several intensity-modulated beams to provide improved dose homogeneity and highly conformal dose distributions.

Water swollen, rigid, 3-dimensional network of cross-linked, hydrophilic macromolecules, 20-95% water. They are used in paints, printing inks, foodstuffs, pharmaceuticals, and cosmetics. (Grant & Hackh's Chemical Dictionary, 5th ed)

Echocardiography amplified by the addition of depth to the conventional two-dimensional ECHOCARDIOGRAPHY visualizing only the length and width of the heart. Three-dimensional ultrasound imaging was first described in 1961 but its application to echocardiography did not take place until 1974. (Mayo Clin Proc 1993;68:221-40)

The process of generating three-dimensional images by electronic, photographic, or other methods. For example, three-dimensional images can be generated by assembling multiple tomographic images with the aid of a computer, while photographic 3-D images (HOLOGRAPHY) can be made by exposing film to the interference pattern created when two laser light sources shine on an object.

Quick Search
Advertisement
 


DeepDyve research library

Searches Linking to this Article