Track topics on Twitter Track topics that are important to you
Nanotransfer-printing lithography simplifies the fabrication of a 3D nanoscale crossbar circuit. Gold nanowires 100 nm in width and with 100 nm spacing are printed onto a polymer layer of electrically switchable, LiClO(4)-doped poly[2-methoxy-5-(2'-ethylhexyloxy)-p-phenylene vinylene] mixed with an epoxy. The transfer process can be repeated to obtain a multilayer nanoscale crossbar structure. This process paves the way toward fabricating 3D circuits with ultrahigh device density and neuromorphic architectures.
Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, 420 Westwood Plaza, Los Angeles, CA 90095 (USA).
This article was published in the following journal.
Name: Small (Weinheim an der Bergstrasse, Germany)
A one-step nanoscale electrohydrodynamic (EHD) inkjet three-dimensional (3D)-printing technique that is based on the drop-on-demand (DOD) operation for which an additional post-sintering process is no...
Au nanostructures are remarkably important in a wide variety of fields for decades. The fabrication of Au nanostructures typically requires time-consuming and expensive electron-beam lithography (EBL)...
The significant improvements observed in the field of bulk-production of printed microchip technologies in the past decade have allowed the fabrication of microchip printing on numerous materials incl...
Force microscopy enables a variety of approaches to manipulate and/or modify surfaces. Few of those methods have evolved into advanced probe-based lithographies. Oxidation scanning probe lithography (...
Extrusion-based bio-printing has great potential as a technique for manipulating biomaterials and living cells to create three-dimensional (3D) scaffolds for damaged tissue repair and function restora...
This study aims to use 3D printing personalized plate to locate the position in which the K-wires would be drilled to save operation time and decrease the number of times that the K-wires ...
Objective: Clinical application of 3D printing implant in bone defect treatment. Study design: multicenter randomized controlled study . Methods:patients randomly grouped according to reg...
This study evaluates the effect of balance circuit in patients with more than one year of postoperative total hip or knee arthroplasty. Patients were randomized between intervention group ...
The purpose of this study is to evaluate the effectiveness of a simplified technique of conventional dentures fabrication, comparing it to a traditional technique, by evaluating the impact...
The goal of this study is to determine the effect of a functional circuit training program as compared to standard cardiac rehabilitation or control exercise in improving physical function...
Inhalation anesthesia where the gases exhaled by the patient are rebreathed as some carbon dioxide is simultaneously removed and anesthetic gas and oxygen are added so that no anesthetic escapes into the room. Closed-circuit anesthesia is used especially with explosive anesthetics to prevent fires where electrical sparking from instruments is possible.
The development and use of techniques to study physical phenomena and construct structures in the nanoscale size range or smaller.
A nitrocellulose solution in ether and alcohol. Collodion has a wide range of uses in industry including applications in the manufacture of photographic film, in fibers, in lacquers, and in engraving and lithography. In medicine it is used as a drug solvent and a wound sealant.
Places provided for the processing, fabrication, assembly, and production of a line of products, services, commodities, or merchandise.